Global Machinery Company ATBR1650-3PK Repair servicing should be done only by an authorized

Page 23

Risk to injury (cont.)

Air tools can become activated by accident during

Disconnect the brad nailer/stapler from air compressor

maintenance or tool changes.

before changing tools, loading/unloading fasteners or

 

accessories, clearing jams and during non-operation.

 

Do not depress trigger when connecting the air hose.

 

Never carry the tool by the hose.

 

Avoid unintentional starting. Don’t carry an air tool which

 

is connected to an air hose, with your finger on the trigger.

 

Repair servicing should be done only by an authorized

 

service representative.

 

 

Air tools can cause the workpiece to move upon contact

Use clamps or other devices to prevent movement.

leading to injury.

 

 

 

Loss of control of the tool can lead to injury to self

Never operate tool while under the influence of drugs

or others.

or alcohol.

 

Don’t overreach. Keep proper footing and balance

 

at all times.

 

Always place yourself in a firmly balanced position when

 

using or carrying the brad nailer/stapler.

 

Keep handles dry, clean, and free from oil and grease.

 

Stay alert. Watch what you are doing. Use common

 

sense. Do not operate tool when you are tired.

 

 

Poor quality, improper, or damaged nailers/staplers can

Always use tool attachments rated for the speed of

fly apart during operation, propelling particles throughout

the air tool.

the work area causing serious injury.

Never use air tools which have been dropped, impacted

 

 

or damaged by use.

 

Never use tool if safety, trigger or springs are inoperable,

 

missing or damaged. Do not alter or remove safety,

 

trigger, or springs. Make daily inspections for free

 

movement of trigger and safety mechanism.

 

Do not apply excessive force to the tool, let the tool

 

perform the work.

 

 

8

Image 23
Contents Finishing Nail GUN KIT Contents Environmental protection Description of symbolsSpecifications IntroductionGeneral safety instructions for air tools Page Risk of fire or explosion Important safety instructions Risk of eye or head injuryWhat could happen How to prevent it Risk to injury Risk of loss of hearingRepair servicing should be done only by an authorized Risk of electric shock Risk of cut or burns Risk of entanglementKnow your product Tool lubrication Preparing the toolOperating the tool Firing mechanism Where to use finishing nailerChecking the safety strike element OperationClearing a jam Adjusting the exhaust directionAdjusting the fastening depth Air sourceTroubleshooting Magnesium Brad NAILER/STAPLER GUN Contents Introduction General safety instructions for air tools Page Important safety instructions Risk of eye or head injury Risk of loss of hearing Repair servicing should be done only by an authorized Risk of electric shock Risk of entanglement Know your product Preparing the tool Where to use brad nailer/stapler Air source Nailer/stapler runs slow or Has loss of powerNailer/stapler skips when Driving brad nails/staplesFraming GUN KIT Contents Nails General safety instructions Additional safety rules for framing gun nailers Page Important safety instructions Risk of eye or head injury Risk of loss of hearing Repair servicing should be done only by an authorized Risk of electric shock Risk of entanglement Non marking tip Air inlet not shown Selecting air hose Tool lubrication Selecting compressorSingle full sequential actuation firing Where to use framing nailerAdjusting depth of nailing Operating the toolMaintenance of nailer MaintenanceConnecting the air hose Repairs CleaningMaintenance of compressor, air settings and air hose Air leaking near Trouble Possible cause Suggested remedy Nailer skips whenDriving nails Tool or in trigger area Nailer runs slow or has