Global Machinery Company ATBR1650-3PK Repair servicing should be done only by an authorized

Page 8

Risk to injury (cont.)

• Air tools can become activated by accident during

• Disconnect the brad nailer from air compressor

maintenance or tool changes.

before changing tools, loading/unloading fasteners or

 

accessories, clearing jams and during non-operation.

 

• Do not depress trigger when connecting the air hose.

 

• Never carry the tool by the hose.

 

• Avoid unintentional starting. Don’t carry an air tool which

 

is connected to an air hose, with your finger on the trigger.

 

• Repair servicing should be done only by an authorized

 

service representative.

 

 

• Air tools can cause the workpiece to move upon contact

• Use clamps or other devices to prevent movement.

leading to injury.

 

 

 

• Loss of control of the tool can lead to injury to self

• Never operate tool while under the influence of drugs

or others.

or alcohol.

 

• Don’t overreach. Keep proper footing and balance

 

at all times.

 

• Always place yourself in a firmly balanced position when

 

using or carrying the brad nailer.

 

• Keep handles dry, clean, and free from oil and grease.

 

• Stay alert. Watch what you are doing. Use common

 

sense. Do not operate tool when you are tired.

 

 

• Poor quality, improper, or damaged nailers can fly apart

• Always use tool attachments rated for the speed of

during operation, propelling particles throughout the work

the air tool.

area causing serious injury.

• Never use air tools which have been dropped, impacted

 

 

or damaged by use.

 

• Never use tool if safety, trigger or springs are inoperable,

 

missing or damaged. Do not alter or remove safety,

 

trigger, or springs. Make daily inspections for free

 

movement of trigger and safety mechanism.

 

• Do not apply excessive force to the tool, let the tool

 

perform the work.

 

 

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Finishing Nail GUN KIT Contents Description of symbols SpecificationsIntroduction Environmental protectionGeneral safety instructions for air tools Page Risk of fire or explosion Important safety instructions Risk of eye or head injuryWhat could happen How to prevent it Risk of loss of hearing Risk to injuryRepair servicing should be done only by an authorized Risk of electric shock Risk of entanglement Risk of cut or burnsKnow your product Preparing the tool Tool lubricationWhere to use finishing nailer Checking the safety strike elementOperation Operating the tool Firing mechanismAdjusting the exhaust direction Adjusting the fastening depthAir source Clearing a jamTroubleshooting Magnesium Brad NAILER/STAPLER GUN Contents Introduction General safety instructions for air tools Page Important safety instructions Risk of eye or head injury Risk of loss of hearing Repair servicing should be done only by an authorized Risk of electric shock Risk of entanglement Know your product Preparing the tool Where to use brad nailer/stapler Air source Has loss of power Nailer/stapler skips whenDriving brad nails/staples Nailer/stapler runs slow orFraming GUN KIT Contents Nails General safety instructions Additional safety rules for framing gun nailers Page Important safety instructions Risk of eye or head injury Risk of loss of hearing Repair servicing should be done only by an authorized Risk of electric shock Risk of entanglement Non marking tip Air inlet not shown Selecting compressor Selecting air hose Tool lubricationWhere to use framing nailer Adjusting depth of nailingOperating the tool Single full sequential actuation firingMaintenance of nailer MaintenanceConnecting the air hose Repairs CleaningMaintenance of compressor, air settings and air hose Trouble Possible cause Suggested remedy Nailer skips when Driving nailsTool or in trigger area Nailer runs slow or has Air leaking near
Top Page Image Contents