W1751 25"
Machine Placement | Cleaning Machine |
•Floor Load: Your sander weighs 1060 lbs and has a 39" X 29" footprint. Some floors may require additional bracing to support both machine and operator.
•Working Clearances: Consider existing and anticipated needs, size of material to be processed through the machine, and space for auxiliary stands, work tables or other machinery when establishing a location for your sander.
•Lighting: Lighting should be bright enough to eliminate shadow and prevent eye strain.
•Electrical: Electrical circuits must be dedicated or large enough to handle amperage requirements. Outlets must be located near each machine, so power or extension cords are clear of
USE helpers or power lifting equipment to lift this wide belt sander. Otherwise, serious per- sonal injury may occur.
MAKE your shop “child safe.” Ensure that your workplace is inaccessible to youngsters by closing and locking all entrances when you are away. NEVER allow untrained visitors in your shop when assem- bling, adjusting or operat- ing equipment.
The upper sanding drum of your sander is coated with a waxy grease that protects it from corrosion during shipment. Clean this grease off with a solvent cleaner or
NEVER use gasoline or other
ALWAYS work in well- ventilated areas far from possible ignition sources when using solvents to clean machinery. Many solvents are toxic when inhaled or ingested. Use care when disposing of waste rags and towels to be sure they DO NOT create fire or environmental hazards.
SET UP