Woodstock W1712 instruction manual Mounting Sander, Keep the Sander Unplugged

Page 14

ASSEMBLY

Mounting Sander

Mounting the sander to the stand will require the help of an assistant. Secure the sander to the stand using the cabinet stand hardware bag.

The Model W1712 is a heavy machine at 165 lbs. Use assistance when lifting or moving the machine.

To mount the sander, do these steps:

1.KEEP THE SANDER UNPLUGGED!

2.Place the sander on the stand.

3.Align the holes in the cabinet with the pre-drilled and tapped mounting holes in the sander.

4.Secure the sander to the stand as shown in

Figure 6.

UNPLUG sander before you do any assembly! Otherwise, serious per- sonal injury to you or others may occur!

Figure 6. Mounting the sander.

-12-

Image 14

Contents Disc & 6 Belt Sander Page Contents About Your New Sander Woodstock Service and SupportIntroduction Warranty and Returns SpecificationsSafety Standard Safety Instructions#16 #14 11-12 13-16 #12 17-20 #10 21-30 Know Your Machine Safety Instructions for Your Sander Grounding 110V OperationExtension Cords Inventory AssemblyUnpacking Dust Collection Initial CleaningShop Preparation Cabinet Assembly To assemble the cabinet stand, do these stepsMounting Sander Keep the Sander UnpluggedInstalling Table Installing tableAdjustments Belt TrackingTable Angle Adjustment Table tilting knob Scale Pointer Machinists SquareDisc table adjustment bolts Only 2 of 4 shown Disc Table AlignmentOperations Test RunMiter Sanding Power SwitchBelt/Disc Selection Disc Sanding Flat SandingCap screw location Work-Stop Fence Changing Sanding Belt Removing belt guard Table and Mounting BracketSanding disc installation Changing Sanding Disc PaperTable And Base MaintenanceGeneral Sanding SurfacesParts Parts Description Description Troubleshooting Sanding Parts Parts Warranty Card Woodstock INTERNATIONAL, INC