Woodstock W1712 instruction manual Maintenance, General, Table And Base, Sanding Surfaces

Page 25

MAINTENANCE

General

To ensure optimum performance from your sander, make a habit of inspecting it before each use. Check for the following conditions and repair or replace when necessary:

Loose mounting bolts.

Worn switch.

Worn or damaged cords and plugs.

Any other condition that could hamper the safe operation of this machine.

Table And Base

Tables can be kept rust-free with regular appli- cations of products like SLIPIT®. For long term storage you may want to consider products like Boeshield T-9™.

Sanding Surfaces

Regularly clean your sanding belt and disc as sawdust builds up in the grit. Clean the sanding belts and discs with PRO STICK® belt cleaners as shown in Figure 27. Cleaning built-up saw- dust will prolong the life of your sanding belts and discs.

MAKE SURE that your machine is unplugged during any maintenance procedures except where instructed other- wise! If this warning is ignored, serious per- sonal injury may occur.

Figure 27. Cleaning the sanding belt with

PRO STICK®.

MAINTENANCE

-23-

Image 25
Contents Disc & 6 Belt Sander Page Contents Introduction Woodstock Service and SupportAbout Your New Sander Specifications Warranty and ReturnsStandard Safety Instructions Safety#16 #14 11-12 13-16 #12 17-20 #10 21-30 Know Your Machine Safety Instructions for Your Sander Extension Cords 110V OperationGrounding Unpacking AssemblyInventory Shop Preparation Initial CleaningDust Collection To assemble the cabinet stand, do these steps Cabinet AssemblyKeep the Sander Unplugged Mounting SanderInstalling table Installing TableBelt Tracking AdjustmentsTable tilting knob Scale Pointer Machinists Square Table Angle AdjustmentDisc Table Alignment Disc table adjustment bolts Only 2 of 4 shownTest Run OperationsBelt/Disc Selection Power SwitchMiter Sanding Flat Sanding Disc SandingCap screw location Work-Stop Fence Removing belt guard Table and Mounting Bracket Changing Sanding BeltChanging Sanding Disc Paper Sanding disc installationGeneral MaintenanceTable And Base Sanding SurfacesParts Parts Description Description Troubleshooting Sanding Parts Parts Warranty Card Woodstock INTERNATIONAL, INC