Changing Sanding
Belt
UNPLUG the power cord when making any adjust- ments during operation! Otherwise, serious per- sonal injury to you or others may occur!
To change the sanding belt, do these steps:
1.UNPLUG THE SANDER!
2.Remove all the cover lock knobs from the back of the belt guard and slide the belt guard up and off the sanding belt as shown in Figure 23.
3.Remove the table and mounting bracket from the belt sander (Figure 24).
4.Release the belt tension by moving the belt tension lever to the “unlock” position.
5.Roll the old sanding belt off the right side of the rollers.
6.Install a new belt with the arrows in the proper direction as shown in Figure 25.
7.
Figure 23. Removing belt guard.
Table and Mounting
bracket
Figure 24. Table and mounting bracket.
Figure 25. Installing a new sanding belt.
OPERATIONS