N(.(,Fne\i jDXelXc D]^%J`eZ\)&'/
9cX[\>l`[\j
The blade guides should be as close to the workpiece as possible. This will help ensure straight cuts by keeping the blade from twisting and drifting off the cut line.
KfX[aljkk_\YcX[\^l`[\j#[fk_\j\jk\gj:
(% DISCONNECT BANDSAW FROM POWER!
)% Loosen the adjustment knob shown in =`^li\*) and slide the blade guide as close to the workpiece as possible, then
=\\[IXk\
The feed rate is controlled by the spring and handle shown in =`^li\**.
=fiJcfn\i=\\[IXk\1 Twist the handle clockwise to add tension to the spring.
=fi=Xjk\i=\\[IXk\1 Twist the handle counterclockwise to remove tension from the spring.
Adjustment Knob |
Blade Guides |
=`^li\*)% Blade guide adjustment knob.
Spring
Handle
=`^li\**% Feed rate spring and handle.
FG<I8K@FEJ