Woodstock W1715 manual ckGfj`k`fe 9cX\Jg, KfZXe\k\YcX\jg\\j#fk\j\jk\gj1

N(.(,Fne\ijDXelXcD]^%J`eZ\)&'/

FG<I8K@FEJ

9cX[\Jg\\[

The bandsaw is capable of operating at 78, 108, or 180 FPM. The speed can easily be adjusted by changing the V-belt placement. =`^li\*+ shows an illustration of each pulley to belt combination, and the following list provides the blade speeds in feet per minute.

9\ckGfj`k`fe	9cX[\Jg\\[
8	78	FPM
9	108	FPM
:	180	FPM

KfZ_Xe^\k_\YcX[\jg\\[j#[fk_\j\jk\gj1

(% DISCONNECT BANDSAW FROM POWER!

)% Unthread the V-belt tension hex bolt to allow the motor to pivot (=`^li\*,).

*% Raise the motor to relieve the belt tension and position the belt in the desired pulley alignment.

+% Release the motor and let the motor weight tension the belt.

,% Position the V-belt tension hex bolt back against the frame of the bandsaw.

>\XiGlcc\p	DfkfiGlcc\p
	8
	9
	:
=`^li\*+% Pulley configurations.

V-belt Tension

Hex Bolt

=`^li\*,% V-belt tension hex bolt.

-24-