Woodstock W1715 manual 9cX\K\id`efcfp

N(.(,Fne\ijDXelXcD]^%J`eZ\)&'/
	9cX[\K\id`efcf^p
Selecting the right blade for the cut requires a knowledge
of various blade characteristics. Use the illustration			A
in =`^li\*- and the following descriptions to better
understand blade characteristics.
8%	B\i]1 The width of the cut by the blade during		B
	cutting.		C
9%	Kffk_J\k1 The amount each tooth is bent left or
	right from the blade.	D	E	H
			F
:%	>Xl^\1 The thickness of the blade.
;%	9cX[\N`[k_1 The widest point of the blade		G	I
	measured from the tip of the tooth to the back edge	=`^li\*-%Bandsaw blade components.
	of the blade.

<% Kffk_IXb\1 The angle of the tooth from a line perpendicular to the length of the blade.

=% >lcc\k;\gk_1 The distance from the tooth tip to the bottom of the curved area (gullet).

>% Kffk_G`kZ_1 The distance between tooth tips.

?% 9cX[\9XZb1 The distance between the bottom of the gullet and the back edge of the blade.

@% KG@1 The number of teeth per inch measured from gullet to gullet.

FG<I8K@FEJ

-25-