Delta DLKC6580V2-1 instruction manual Air Filter Inspection and Replacement, Belt Replacement

Page 18

Air Filter - Inspection and Replacement

Hot surfaces. Risk of burn.

Compressor heads are exposed when filter cover is removed. Allow compressor to cool prior to servicing.

A dirty air filter will not allow the compressor to operate at full capaci- ty. Keep the air filter clean at all times.

1.Remove the air filter cover.

2.Remove the air filter from filter cover.

IMPORTANT: Do not operate the compressor with the air filter removed.

3.Place new air filter into filter cover. Refer to the “Repair Parts” for the correct part number.

4.Replace air filter cover and lock into place.

Belt - Replacement

(Refer to the Outfit Parts Manual for replacement belt part number.)

Serious injury or damage may

occur if parts of the body or loose items get caught in moving parts. Never operate the outfit with the belt guard removed. The belt guard should be removed only when the AIR compressor power is disconnected.

1.Turn air compressor off, lock out the power supply, and relieve all air pressure from the air tank.

2.Remove the belt guard.

3.Mark pump position on saddle.

4.Loosen the motor mounting screws and slide the motor toward the air compressor.

5.Remove the belt and replace with a new one.

6.See the “Adjust Belt Tension” before tightening motor mount- ing screws.

Adjusting Belt Tension

1.Slide motor into original position, line the motor up with the mark made earlier on saddle.

2.Tighten two outside motor mounting screws enough to hold the motor in place for checking pulley and flywheel alignment.

3.The belt should deflect 3/16” at midway between the pulley and the flywheel when a 5 pound weight is applied at the midway point.

Deflection

4.When proper belt tension is achieved, tighten all four motor mounting screws. See Parts manual for torque specifications.

NOTE: Once the engine pulley has been moved from its factory set location, the grooves of the fly- wheel and pulley must be aligned to within 1/16” to prevent excessive belt wear. Verify the alignment by performing the following Pulley and Flywheel - Alignment.

D26161

18-ENG

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Instructio N M Anual Safety Guidelines Definitions Hazard Attachments & Accessories Hazard What can Happen HOW to Prevent IT Fire, Inhalation, Damage to Vehicle Surfaces Glossary SpecificationsAccessories Duty CycleUnpacking AssemblyTools Required for Assembly To Add Oil To PumpInstallation Location of the Air CompressorAnchoring of the Air Compressor Wiring Instructions Air Distribution SystemTypical Compressed AIR Distribution System Operation Know Your Air Compressor Description of OperationHow to Use Your Unit Before Starting Break-in ProcedureHow to Stop How to Start Before Each Start-UpMaintenance To Check Safety ValveCustomer Responsibilities Checking To Drain TankOil ChangingAir Filter Inspection and Replacement Belt ReplacementAdjusting Belt Tension Inspect Air Lines and Fittings for Leaks Motor Pulley/Flywheel AlignmentAir Compressor Pump Intake and Exhaust Valves Air compressor Head Bolts TorquingService and Adjustments To Replace or Clean Check ValveAdditional Service StorageMotor Troubleshooting Problem Cause CorrectionPressure reading Minal box area 25-ENG D26161 AIR Compressor Diagram Parts List KEY Part Number DescriptionPump Diagram Not Shown Limited Warranty

DLKC6580V2-1 specifications

The Delta DLKC6580V2-1 is an advanced industrial AC servo drive designed to deliver exceptional performance and efficiency in a wide range of automation applications. This servo drive is engineered to enhance system responsiveness while ensuring precise motion control, making it an ideal choice for industries such as manufacturing, packaging, and robotics.

One of the standout features of the DLKC6580V2-1 is its high-speed communication capabilities. The drive supports various communication protocols including EtherCAT, CANopen, and Modbus RTU, ensuring seamless integration into existing systems. This flexibility allows users to connect multiple drives in a network, facilitating coordinated motion control and optimizing the performance of complex machinery.

The DLKC6580V2-1 boasts a powerful control algorithm that provides excellent torque performance and dynamic response. The drive utilizes advanced PWM (Pulse Width Modulation) technology, allowing for smooth operation across a broad range of speeds. This results in minimizing vibrations and improving the overall lifespan of connected servo motors.

In terms of ease of use, the DLKC6580V2-1 features an intuitive user interface with built-in diagnostics and monitoring capabilities. This user-friendly design allows operators to configure parameters swiftly, monitor real-time performance, and troubleshoot any issues effectively. Additionally, it supports maintenance-free operation, significantly reducing downtime and operational costs.

Safety is a priority with the DLKC6580V2-1, which includes multiple safety features like over-voltage, over-current, and temperature protection. The drive is also compliant with international safety standards, ensuring it can be deployed in various environments without compromising personnel safety.

Moreover, the DLKC6580V2-1 is designed to operate efficiently across a wide range of temperatures, making it suitable for different working conditions. Its robust construction ensures reliability and durability, which is crucial for demanding industrial applications.

In conclusion, the Delta DLKC6580V2-1 AC servo drive is a high-performance solution that combines advanced control technology, versatile communication options, and user-friendly features. Its robust safety measures and adaptability to varying operational conditions make it an essential component for enhancing automation in modern industrial setups. Whether for precision machining or complex automation processes, the DLKC6580V2-1 stands as a reliable choice for engineers and manufacturers aiming to optimize their production capabilities.
Top Page Image Contents