Delta DLKC6580V2-1 instruction manual Storage, Motor, Additional Service

Page 21

Motor

This motor has a manual thermal overload protector. If the motor over- heats for any reason, the overload protector will shut off the motor. The motor must be allowed to cool down before restarting. To restart:

1.Place the On/Auto/Off lever in the Off position.

2.Allow the motor to cool.

3.Depress the red reset button on the motor.

4.Place the On/Auto/Off lever in the On/Auto postion to restart the motor.

IMPORTANT: If the overload protec- tor shuts the motor off frequently, check for a possible voltage problem. Low voltage can also be suspected when:

1.The motor does not get up to full power or speed.

2.Fuses blow out when starting the motor; lights dim and remain dim when motor is started and is run- ning.

Reset Button

Additional Service

Disassembly or service of the air compressor beyond what is covered in this manual is not recommended. If additional service is required, contact your nearest Authorized Warranty Service Center.

STORAGE

Before you store the air compressor, make sure you do the following:

1.Review the “Maintenance” sec- tion on the preceding pages and perform scheduled maintenance as necessary.

2.Set the On/Auto/Off lever to “OFF”.

3.Close the globe valve.

4.Remove the air tool or accessory.

5.Open the globe valve and allow the air to slowly bleed from the air tank until tank pressure is approximately 20 psi.

6.Drain water from air tank by opening drain valve (counter- clockwise) on bottom of tank.

Water will condense in the air tank. If not drained, water will

corrode and weaken the air tank causing a risk of air tank rupture.

7.After the water has been drained, close the drain or drain valve.

NOTE: If drain valve is plugged, release all air pressure. The valve can then be removed, cleaned, then reinstalled.

8.Protect the air hose from dam- age (such as being stepped on or run over).

21-ENG

D26161

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Instructio N M Anual Safety Guidelines Definitions Hazard Attachments & Accessories Hazard What can Happen HOW to Prevent IT Fire, Inhalation, Damage to Vehicle Surfaces Accessories SpecificationsGlossary Duty CycleTools Required for Assembly AssemblyUnpacking To Add Oil To PumpInstallation Location of the Air CompressorAnchoring of the Air Compressor Air Distribution System Wiring InstructionsTypical Compressed AIR Distribution System Know Your Air Compressor Description of Operation OperationHow to Use Your Unit Before Starting Break-in ProcedureHow to Stop Before Each Start-Up How to StartMaintenance To Check Safety ValveCustomer Responsibilities Oil To Drain TankChecking ChangingAir Filter Inspection and Replacement Belt ReplacementAdjusting Belt Tension Air Compressor Pump Intake and Exhaust Valves Motor Pulley/Flywheel AlignmentInspect Air Lines and Fittings for Leaks Air compressor Head Bolts TorquingTo Replace or Clean Check Valve Service and AdjustmentsAdditional Service StorageMotor Problem Cause Correction TroubleshootingPressure reading Minal box area 25-ENG D26161 AIR Compressor Diagram KEY Part Number Description Parts ListPump Diagram Not Shown Limited Warranty

DLKC6580V2-1 specifications

The Delta DLKC6580V2-1 is an advanced industrial AC servo drive designed to deliver exceptional performance and efficiency in a wide range of automation applications. This servo drive is engineered to enhance system responsiveness while ensuring precise motion control, making it an ideal choice for industries such as manufacturing, packaging, and robotics.

One of the standout features of the DLKC6580V2-1 is its high-speed communication capabilities. The drive supports various communication protocols including EtherCAT, CANopen, and Modbus RTU, ensuring seamless integration into existing systems. This flexibility allows users to connect multiple drives in a network, facilitating coordinated motion control and optimizing the performance of complex machinery.

The DLKC6580V2-1 boasts a powerful control algorithm that provides excellent torque performance and dynamic response. The drive utilizes advanced PWM (Pulse Width Modulation) technology, allowing for smooth operation across a broad range of speeds. This results in minimizing vibrations and improving the overall lifespan of connected servo motors.

In terms of ease of use, the DLKC6580V2-1 features an intuitive user interface with built-in diagnostics and monitoring capabilities. This user-friendly design allows operators to configure parameters swiftly, monitor real-time performance, and troubleshoot any issues effectively. Additionally, it supports maintenance-free operation, significantly reducing downtime and operational costs.

Safety is a priority with the DLKC6580V2-1, which includes multiple safety features like over-voltage, over-current, and temperature protection. The drive is also compliant with international safety standards, ensuring it can be deployed in various environments without compromising personnel safety.

Moreover, the DLKC6580V2-1 is designed to operate efficiently across a wide range of temperatures, making it suitable for different working conditions. Its robust construction ensures reliability and durability, which is crucial for demanding industrial applications.

In conclusion, the Delta DLKC6580V2-1 AC servo drive is a high-performance solution that combines advanced control technology, versatile communication options, and user-friendly features. Its robust safety measures and adaptability to varying operational conditions make it an essential component for enhancing automation in modern industrial setups. Whether for precision machining or complex automation processes, the DLKC6580V2-1 stands as a reliable choice for engineers and manufacturers aiming to optimize their production capabilities.
Top Page Image Contents