See Warranty on page 8 for important information about commercial use of this product.
Operating Instructions | Model NB0064 |
|
|
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury, death and/or property damage! Retain instructions for future reference.
Finishing
Nailer
BUILT TO LAST
Table of Contents
General
Specifications . . . . . . . . . . . . . . .2
Operating The
Operational Mode . . . . . . . . . . .4
Troubleshooting . . . . . . . . . . . . .7
Warranty . . . . . . . . . . . . . . . . . . .8
Description
This nailer is designed for decorative trim, molding, window casings, furni- ture trim and picture frame assembly.
Features include: convenient rear load- ing magazine which holds up to 100 nails,
General Safety
Information
CALIFORNIA PROPOSITION 65
!DANGER Youcan cre-
ate dust when you cut, sand, drill or grind materi- als such as wood, paint,
metal, concrete, cement, or other masonry. This dust often contains chemicals known to cause cancer, birth defects, or other reproductive harm. Wear protective gear.
This manual contains safety, opera- tional and maintenance information. Contact your Campbell Hausfeld repre- sentative if you have any questions.
OPERATOR’S RESPONSIBILITY:
The tool operator is responsible for:
•Reading and understanding tool labels and manual.
•Selecting an appropriate tool actua- tion system, taking into considera- tion the work application for which the tool is used.
•The safe use of the tool.
•Ensuring that the tool is used only
when the operator and all other person-
nel in the work area
are wearing ANSI Z87 eye protec- tion equipment, and when required, other appropriate protec- tion equipment such as head, hear- ing and foot protection equipment. Serious eye or permanent hearing loss could result.
•Assuring that the tool is kept in safe working order as described in this manual.
EMPLOYER’S RESPONSIBILITY:
•Selecting an appropriate tool actua- tion system, taking into considera- tion the work application for which the tool is used.
•Ensuring that this manual is avail- able to operators and personnel performing maintenance.
•The safe use of the tool.
•Enforcing that the tool is used only
when the operator and all other person-
nel in the work area
are wearing ANSI Z87 eye protec- tion equipment, and when required, other appropriate protec-
Model NB0064
Locate model and vendor date code on tool magazine and cap and record below:
Model No. ________________________
Vendor Date Code ________________
Retain these numbers for
future reference.
tion equipment such as head, hear- ing and foot protection equipment. Serious eye or permanent hearing loss could result.
•Assuring that the tool is kept in safe working order as described in this manual.
•Assuring the proper maintenance of all tools in employer’s possession.
•Ensuring that tools which require repair are not further used before repair. Tags and physical segrega- tion are recommended means of control.
Danger indicates
! DANGER an imminently hazardous situation which, if not avoided, WILL result in death or seri- ous injury.
REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.
Campbell Hausfeld Nailers meet or exceed Industries’ Standards as set forth by the American National Standard Institute/International Staple, Nail and Tool Association in ANSI/ISANTA
© 2002 Campbell Hausfeld/Scott Fetzer
For parts, product & service information | IN272000AV 12/02 |
visit www.chpower.com