RIDGID Comprehensive Assembly Guide for BS1400 Saw

Assembly (continued)

Mounting the Dust Chute

1.From the loose parts bag find the following items:

2Screw Pan Head Lock M6 x 1

2.From the loose parts find the following items:

1Dust Chute

3.Open lower blade guard cover and install dust chute. Use fasteners supplied. Close lower blade guard cover.

Screw Pan Head

Lock M6 x 1

Dust Chute

Dust Chute

Mounting the Table Trunnion Support To Saw Body

1.From the loose parts bag find the following items: 2 M8 x 35 Hex Head Bolts (approx. 1-3/8”)

2 M8 Lockwashers

1 M8 x 80 Hex Cap Bolt

(table stop bolt approx. 3-1/8” long)

1M8 Nut (For Table Stop Bolt)

2.From the loose parts find the following items:

1Table Trunnion Support (shown below)

3.Attach trunnion support to saw body with two hex head bolts and two lockwashers as shown.

4.Thread nut (D) onto table stop bolt (C) and attach to trunnion support.

Screw Hex Head

M8 x 1.25-80

Lockwasher	Bolt Hex Head
M8	M8 x 1.25-35	Nut Hex M8

Bolt Hex Head

M8 x 1.25-35

Lockwasher

Screw Hex Head

M8 x 1.25-80

Nut Hex M8

Mounting Bevel Scale To Table

1.From the loose parts find the following items:

2Screw Flat Head M5 x 0.8-15

2Washer M5

2Nut Hex M5 x 0.8

1Scale Bevel

2.Insert the screws through the table and bevel scale as shown.

3.Install a washer and nut. Tighten

Screw Flat Hd.	Washer M5	Nut Hex M5 x 0.8
M5 x 0.8-15

Bevel Scale

14