RIDGID BS1400 manual Mounting the Table To Saw Body, Installing Bevel Scale Indicator

Mounting the Table To Saw Body

1.From the loose parts find the following items:

1 Table

2 Knobs

2.To mount table, remove table insert and table pin from the table. Guide sawblade through slot in table and place table screws into trunnions. Attach and lock with lock knobs.

Installing Bevel Scale Indicator

1.From the loose parts find the following items:

1Pointer

1Screw Pan Head M5 x 0.8-6

2.Insert screw through the slot in the pointer and into the trunnion support bracket. Tighten

WARNING: Unit is shipped with blade installed. Do not plug in or operate unit unless the blade is adjusted and aligned per section titled “Changing Blades”.

3.Replace table insert and table pin.

4.Transportation and handling may have caused some fasteners to loosen. Before operating, check all screws, bolts and nuts to make sure they are snug. Operate machine only after reading the entire manual including blade tracking, blade guide adjustments, and safety rules.

Screw Pan Head

M5 x 0.8-6

Pointer

Trunnion

Support

Bracket

15