Samsung RF28HMEDBSR/ML manual If the Flex Zone or LED lighting is not, To re-install

• Tilt up the front of the drawer and pull straight	If the Flex Zone or LED lighting is not
towards you. Then, move the drawer slightly	working, check the connectors [ ( 1 ), ( 2 )
in the direction of the arrow in the illustration	shown below ] for cracks or leaks.
below, and then pull out.

( 2 )

To re-install

•Insert the drawer into the frame rails and push back into place.

•Slide the bin in above the desired location and

push down until it stops.

The drawers need to be removed before CAUTION the glass shelf above them can be lifted

out.

g poeratin

4. Flex Zone

To remove the Flex Zone – Pull the Flex door out to full extension. Lift the Flex Zone up, pulling it to your body with both hands.

To re-install the Flex Zone – Open the Flex door to full extension. Tilt the front of the Flex Zone up, place the back of the Flex Zone onto the rails, and then lower the front until the whole Zone rests on the rails.

( 1 )

1.Refer to page 20 for disassembly instructions.

2.Open the cap cover rail with a flat-blade screwdriver.

Using the doors

Ensure that the doors close all the way and are securely sealed.

When the refrigerator door is only partially open, it will automatically close. If the door is opened more than its auto close range, it will remain open. You must close it manually.

English - 37

DA68-02952D-02.indb 37 2016. 12. 16.

�� 7:50