( 4 ) Fridge/Power Cool (3sec)

The Fridge button serves two purposes:

-- To set the Fridge to your desired temperature. -- To turn the Power Cool function on and off.

1)To set the Fridge temperature, press the Fridge button. You can set the temperature between 7 °C (44 °F) and 1 °C (34 °F).

2) Power Cool function

Touch and hold this button for 3 seconds to decrease the time needed to cool products in the Refrigerator. It can be helpful if you need to quickly cool easily spoiled items or if the temperature in the fridge has warmed dramatically (for example, if the door was left open).

( 5 ) Lighting/ºC ↔ ºF (3sec)

The Lighting button serves two purposes: -- To turn the dispenser light on and off

-- To switch the temperature units between ºC and ºF

1) Light Function

Touching the Lighting button turns on the Dispenser LED lamp in continuous mode so that it stays on continuously. The button also lights up. If you want the Dispenser lamp to come on only when some one uses the dispenser, press the Lighting button to turn the continuous mode off.

2) To switch the temperature units between ºC and ºF

Touch and hold this button for 3 seconds to select the temperature display you want.

Each time you press and hold the button, the ºC and ºF temperature modes alternate and the ºC or ºF icon lights up, indicating your selection.

( 6 ) Ice Maker Off/Control Lock (3sec)

The Ice Maker Off button serves two purposes: -- To turn the Ice maker on and off

-- To turn the Control Lock Function on and off.

1) Ice Off Function

If you don’t want to make more ice, press the Ice Maker Off button.

2) Control Lock Function

Touch and hold this button for 3 seconds to lock the display, the Flex Zone panel, and the dispenser buttons so the buttons can not be used.

When Control Lock is on, the refrigerator does not dispense ice or water, even if the Dispenser Lever is pressed.

The Control Lock icon lights up to indicate you’ve activated the Control Lock function. Press 3 seconds to unlock.

( 7 ) Water

Touch this button to dispense water. This mode can not be used with the Ice Type mode simultaneously.

Water mode shuts off when you touch the Cubed/Crushed Ice button.

( 8 ) Filter

Water filter usage

This icon lights up when you need to change the filter, usually after the refrigerator has dispensed about 300 gallons of water (after about

6 months). The icon will blink red for several seconds when you open or close the door. After you install the new water filter, reset the filter indicator by touching and holding the Hold 3 sec for Filter Reset button for 3 seconds.

-- If water is not dispensing or dispensing slowly, you need to replace the water filter because the water filter is clogged.

-- Some areas have large amounts of lime in their water, which causes the water filter to clog more quickly.

( 9 ) Ice Type

Touch this button to select your desired ice type. Cubed and crushed ice modes alternate when you press the button. This mode can not be used with the Water mode simultaneously.

eratinop g

English - 27

DA68-02952D-02.indb 27

2016. 12. 16. �� 7:50