Samsung RF28HMEDBSR/ML manual Connecting to the water supply line

Connecting to the water supply line

1.First, shut off the main water supply line.

2.Locate the nearest cold, drinking water line.

3.Follow the Water line Installation Instructions in the installation kit.

CAUTION

Remove cap

Loosen a

The water line must be connected to the cold water pipe.

If it is connected to the hot water pipe, it may cause the purifier to malfunction.

Water Line from

unit

Water Line from

Kit

No gap

Close Main Water

pipe

Close Main

Water pipe

No gap

Before being used, the leakage in these CAUTION places should be examined.

•Samsung Warranty does not cover WATER LINE INSTALLATION.

•It will be done at customer’s charge unless the retail price includes installation cost.

•Please contact Plumber or Authorized Installer for the installation if needed.

•If Water leakage occurs due to improper installation, Please contact installer.

4.After connecting the water supply to the water filter, turn your main water supply back on and dispense about 3 L to clear and prime the water filter.

Connecting the water line to the refrigerator

1.Remove the cap from the water line on the unit and insert the compression nut of the water line into the water line on the unit.

2.Connect the water line on the unit with the water line in the kit .

3.Tighten the compression nut onto the compression fitting. There should be no gaps between (A, B & C)

4.Turn water on and check for any leakage.

Only connect the water line to a drinkable water source. If you have to repair or disassemble the water line, cut off 6.5 mm of the plastic tubing to make sure you get a snug, leak-free connection.

English - 24

DA68-02952D-02.indb 24 2016. 12. 16.

�� 7:50