4.Remove 1 hex head bolt from each side with a socket wrench (10 mm).
5.Lift up the Flex door from the rails.
DISASSEMBLING THE
FREEZER DOOR
1.Take out the upper drawer by lifting it up.
g up settin
2.Remove the freeze room guard ( 1 ) by lifting the guard up.
RE-ASSEMBLING THE FLEX DOOR
To reattach the flex doors, assemble parts in reverse order.
Be sure to connect the Flex Door Wire CAUTION Connector. If it is not connected, the Flex
Room does not work.
( 1 )
3.Take out the lower basket ( 2 ) by lifting the basket up from the rail system.
( 2 )
You can scratch the side of the bin if you CAUTION twist it left or right when disassembling or
re-assembling it.
4. Press the fixing hook of the rail system.
English - 21
2016. 12. 16. |
�� 7:50