5.Holding the top of the Freezer Drawer, pull it out all the way, and then remove it from the rail system.

RE-ASSEMBLING THE

FREEZER DOOR

To reattach the drawer after you have moved

the fridge to its final location, assemble the parts in reverse order.

CAUTION

CAUTION

CAUTION

Be careful not to scratch or dent the sliding rail by letting it strike the floor.

Make sure that you mount the freezer basket in the right position when removing

/installing the freezer door. Failing to do so may result in the door not opening or closing properly.

Putting too much food into the freezer drawers can prevent the freezer from closing completely and can cause frost build-up.

ADJUSTING THE LEVEL

Make sure the refrigerator is level so that you can make final adjustments. Use a level to test if the refrigerator is level both side to side and back to front. If the refrigerator is not level, you will not be able to get the doors perfectly even, which may cause moisture condensation and increased energy bills. Below is an example of how to level the refrigerator if the left side of the refrigerator is lower than the right side.

How to adjust the level

1.Open the freezer drawer and remove the lower basket.

2.Insert a flat-blade screwdriver (-) into the notch on the left control lever, and then turn it counter-clockwise to level the refrigerator. (You turn the lever clockwise to lower the refrigerator and counterclockwise to raise it.)

 

 

 

 

 

flat

 

-blade

Control Lever

screwdriver (-)

 

 

Both control levers must be touching the CAUTION floor to avoid possible personal injury or

property damage because of tipping.

If the right side is lower, perform the same procedure, but with the right control lever.

It is difficult to remove the cover leg front from the refrigerator, so we do not recommend making small adjustments with the control lever. Instead, refer to the next page for the best way to make minor adjustments to the doors.

English - 22

DA68-02952D-02.indb 22

2016. 12. 16. �� 7:50