BenQ VA261 quick start Using the TV, Power on and standby, Switching inputs, Adjusting volume

Using the TV

Power on and standby

Turning the TV on

After plugging the TV's power cable into a wall outlet and turning on the main power switch, the TV will enter standby mode. The power indicator will light up red.

Press Power on the TV, or	on the remote control. The TV will turn on and the power
indicator will change to green.
Putting the TV to standby
Press Power on the TV, or	on the remote control again, and the TV will return to standby

mode. The power indicator will turn red.

Turning the TV off

Should you wish to remove power from the TV, you should first turn off the main power switch on the rear of the set adjacent to the power cable socket.

Switching inputs

1.Turn on all connected equipment or devices before selecting an input.

2.Press INPUT on the TV, or INPUT on the remote control to display the current selected input. Press the button repeatedly until your desired input is displayed.

The sequence is as follows:

TV

Channel Number

HDMI

(or DVI)

AV1

(or AV1 S-Video)

VGA

AV2

(or AV2 S-Video)

COMPONENT 2

AV3

(or AV3 YPbPr)

COMPONENT 1

•AV1 S-Video and AV2 S-Video will appear only when an S-Video signal is connected to the AV1 or AV2 S-Video input.

•AV3 YPbPr will appear only when a Component video signal is connected to the AV3 input.

•DVI will appear only when a DVI digital video signal is connected to the HDMI input.

•Be aware that HDMI input must be HDCP-compliant to be displayed.

•The HDMI (or DVI) input option is unavailable on the VA261 model.

•When you select AV1 (AV1 S-Video), AV2 (AV2 S-Video) or AV3 (AV3 YPbPr) as the input source and the image does not display, check that the signal cables are correctly connected (see "Connecting audio and video inputs" on page 12) and if the default input signal types for these inputs are correctly selected (see "Setup menu" on page 26).

Adjusting volume

•Press VOL+ on the TV, or VOLUME + on the remote control to increase the sound level. The OSD volume indicator will increase in length as volume rises.

•Press VOL- on the TV, or VOLUME - on the remote control to decrease the sound level. The OSD volume indicator will decrease in length as volume falls.

Mute setting

•Press MUTE on the remote control to turn off the sound (without adjusting the volume).

•Press MUTE again, or press VOLUME + or - to restore the sound level.

TV sound mode selection

Press TV SOUND on the remote control to select 'Sound 1', 'Sound 2', 'Stereo' or 'Mono' systems. (The items available will depend on the TV and video sound system being received.)

18Using the TV

Downloaded From TV-Manual.com Manuals