BenQ VA261 quick start Troubleshooting, Symptoms Possible Causes

Troubleshooting

There are many external influences and circumstances beyond the control of BenQ which may be causing problems with your TV. Some of the more common and user fixable problems are listed below for your information.

Please check the following list before calling your nearest BenQ Customer Service Center, and attempt the following steps to diagnose and fix the problem yourself:

	Symptoms	Possible Causes
	TV does not turn ON	Ensure the TV power is ON (as shown by the green Power
		indicator on the front of the TV).
		If so:
		• Check that the remote control is working or not.
		Press the Power button on it, and on the TV itself.
		If not:
		• Check that the power plug is securely inserted into both
		the AC INPUT socket on the TV and the wall outlet, and
		that both are switched on.
		• Check that power is available from the power outlet by
		trying another known working appliance (e.g. desk
		lamp) from that same power outlet.
	There is no picture or	• Try a different input source to confirm if the symptom is
	sound	still present or whether the source is at fault.
		• Check for mis-connection of cables for that input.
		• Make sure the antenna cable is properly connected.
		• Change channels to confirm if the symptom is still
		present or whether the channel station is at fault.
		• Try a different picture mode to check that picture
		settings haven’t been turned down.
		• Adjust the volume control to check that isn't turned
		down, or that the mute button wasn't pressed.
		• Check the audio input cables for disconnection.
	The power indicator lights	The TV is in PC standby mode. Reactivate the connected
	orange	computer.
	"Out of range" appears	The PC VGA input signal resolution is set too high. 1360 x
		768 @ 60Hz is the highest acceptable PC timing.
	The image appears	• Ensure the TV's aspect ratio is correctly set to suit the
	distorted	image source.
		• Try a different input source to confirm if the symptom is
		still present or whether the source is at fault.
	Improper screen position or	• Try selecting a different aspect ratio.
	size	• Try a different input source to confirm if the symptom is
		still present or whether the source is at fault.
	Degraded colours or hue	• Try a different input source to confirm if the symptom is
		still present or whether the source is at fault.
		• Check for mis-connection of cables for that input.
		• Make sure the antenna cable is properly connected.
		• Change channels to confirm if the symptom is still
		present or whether the channel station is at fault.
		• Try a different picture mode to check that picture
		settings haven't been altered.
		• Check the picture properties in the Picture menu.
		• The source may be set to output NTSC. Alter it to PAL.
38 Reference

Downloaded From TV-Manual.com Manuals