Getting to know the remote control
1. Power/standby
Press this button to power the TV on or put it to standby mode.
See "Power on and standby" on page 18.
2. INPUT
Press this button once to display the current input signal type information on the upper right corner of the screen. Press it a second time to select a different input source.
See "Switching inputs" on page 18.
3. BACKLIGHT
Press this button to select your desired screen backlight level. (This function is not available with the VA261 and VA321 models.)
See "Adjusting the backlight" on page 19.
4. INFO
Press this button to display the screen image source information.
See "Display information" on page 21.
5. SLEEP/blue
• Press this button to set the automatic
• When Teletext displays
See "Using the sleep timer" on page 20.
6.TV SOUND/red
•Press this button to toggle among available sound reception modes.
See "TV sound mode selection" on page 18.
•When Teletext displays
See "Using the sleep timer" on page 20.
7.PRESET/yellow
•Press this button to select from among 4 preset picture modes.
See "Adjusting aspect ratio" on page 19.
•When Teletext displays
8.AUDIO/green
The audio function of this button is unsupported in this TV series. When Teletext displays on- screen, press this button to select the corresponding colour Teletext page.
See "Using the sleep timer" on page 20.
9. MODE
Press this button to cycle the Teletext display mode between Teletext only or with Teletext superimposed on the display. See "Using the sleep timer" on page 20.
10. INDEX
Press this button to go to the Teletext index page.
See "Using the sleep timer" on page 20.
16Getting to know the remote control
Downloaded From
