5. Activate the remote control

1. Locate the remote control and batteries from the packaging, and unwrap them.

• Be cautious when handling batteries. See "Warnings" on page 40.

2.Turn the remote control end up to reveal its base, and open the lid of the battery compartment by using a small coin or

similarly curved object to rotate the slot 90° anticlockwise. The lid is spring loaded and will popup and come loose from the remote control body.

3. Insert the batteries (supplied) ensuring that the positive and negative marked battery terminals match the (+) and (-) marks in the battery compartment.

Note that these batteries are provided for your convenience so that you can operate the TV straight away, however they have been stored with the TV for some time and are no longer fresh. You should replace them as soon as possible.

4.Refit the lid of the battery compartment by inserting the hinge into the recess at one edge and levering the lid down

into position with the thumb of the hand holding the remote control body.

5.Whilst holding the lid in place in this manner, use your other hand and a small coin or similarly shaped object to

rotate the locking slot 90° clockwise locking the lid in place.

Remote control usage tips

Point and aim the top front of the Remote Control directly at the TV when pressing the buttons.

The remote control must be held at an angle within 30 degrees of the TV's remote control sensor window to function correctly. The distance between the remote control and the sensors should not exceed 5 metres.

Do not cover the sensor window on the front of the TV (below the power indicator lamp), or place objects in front of it which will block the direct line-of-sight between the Remote Control and the sensor window on the TV.

30 degrees

5 metres

Do not let the remote control become wet, or place it in humid environments (like bathrooms.)

If the remote control sensor window on the TV is in direct sunlight or strong light, the remote control may not operate properly. In this situation, change the light source or readjust the angle of your TV, or operate the remote control from a location closer to the remote control sensor window on the TV.

4Section 1: Quick Start Guide

Downloaded From TV-Manual.com Manuals

Page 4
Image 4
BenQ VA261 quick start Activate the remote control, Remote control usage tips