Toshiba 46WX800, 55WX800U manual Selecting the picture mode, Adjusting the picture quality

Chapter 7: Picture and sound controls

Adjusting the picture

Selecting the picture mode

You can select your desired picture settings from the following modes, as described below.

Mode	Description
AutoView™	Automatically adjusts picture settings
	based on ambient light conditions and
	input signal content.
Sports	Bright and dynamic picture.
Standard	Standard picture settings.
Movie 1	Lower contrast for darkened room.
Movie 2
	Designed for playing a video game
Game	requiring split-second timing between
	the screen display and input from the
	controller.
PC	Designed for viewing of PC tables and
	documents.

Note:

•PC mode is available for HDMI and PC inputs only (not displayed for other input sources).

•Game mode cannot be turned on when the ANT/CABLE input is selected.

1 Y> PICTURE > Picture Mode.

2 Press C or c to select a mode. Press O.

Note: The picture mode you select affects the current input only. You can select a different picture mode for each input.

Adjusting the picture quality

The picture quality you adjusted under the picture mode is saved to the picture mode of same name.

Selection	Pressing C	Pressing c
Backlight*	darker	lighter
Contrast	lower	higher
Brightness	darker	lighter
Color	paler	deeper
Tint	reddish	greenish
Sharpness	softer	sharper

*Backlight: Adjusts the brightness of the entire screen. When in video mode and no signal is input, this selection is set to 0. (Settings are stored in memory.)

Note: Some menus cannot be adjusted in any of the following cases.

•AutoView is selected.

•TheaterLock is set to On.

To adjust the picture quality:

1 Y> PICTURE > the setting you would like to adjust (Backlight, Contrast, Brightness, Color, Tint, or Sharpness).

2 Press C or c to adjust the setting. Press O.

Note: The picture setting that you adjusted affects the current input only. You can adjust the picture quality separately for each input.

To reset to the factory defaults:

1 Select the picture mode you want to reset.

2 Y> PICTURE > Reset > OK . A confirmation screen appears.

3 Press C or c to select Yes. Press OK .

53