Toshiba 55WX800U manual Smart Sensor, Backlight Adjustment Pro, Room Lighting, Mode Descriptiom

Chapter 7: Picture and sound controls

MPEG NR

The MPEG noise reduction feature allows you to reduce visible interference caused by MPEG compression.

1 Y> PICTURE > Advanced Picture Settings >

OK .

2 Press B or b to select Noise Reduction. Press OK . 3 Press B or b to highlight MPEG NR.

4 Press C or c to select either Low, Middle, High or Off. Press OK .

Note: If the Picture Mode is set to Game or PC, this feature is not available.

DNR

DNR lets you soften the screen representation of a weak signal to reduce the noise effect.

1 Y> PICTURE > Advanced Picture Settings >

OK .

2 Press B or b to select Noise Reduction. Press OK . 3 Press B or b to select DNR.

4 Press C or c to select Low, Middle, High, Auto or Off. Press OK .

Note:

•If the Picture Mode is set to Game or PC, this feature is not available.

•The differences may not always be noticeable. For the best result, use lower settings, as picture quality can be lost if the setting is too high.

Smart Sensor

When the Auto Brightness function of Smart Sensor is set to On, the TV optimizes the backlighting levels to suit ambient light conditions.

1 Y> PICTURE > Advanced Picture Settings >

OK .

2 Press B or b to select Smart Sensor Settings. Press

OK .

3 Press B or b to select Auto Brightness Setting. 4 Press C or c to select On or Off. Press OK .

Note: When the Picture Mode is set to AutoView, this feature is automatically set to On and will be not available.

Backlight Adjustment Pro

This feature adjusts the backlight so that it can change to match the ambient light conditions.

1	Y> PICTURE > Advanced Picture Settings >
2	OK .
	Press B or b to select Smart Sensor Settings. Press
3	OK .
	Press B or b to select Backlight Adjustment Pro.
	Press OK . The Backlight Control Level screen
4	appears.
	Press OK to display the adjustment window. Press C
	or c to select the point. Press B or b to adjust the
	level. The adjustment range is from 0 to 100.
		Backlight Adjustment Pro
			Backlight Control Level
					37
		100
		Control
		Level
						Cancel
		0				Reset
				Ambient Light
5
	Press OK to fix the adjustment.
	To cancel the adjustment when selecting a point,
	select Cancel on the screen.

To reset the adjustments of all points to the factory defaults, select Reset on the screen. Press OK .

Note: If the Auto Brightness Setting is set to Off, this feature will be not available.

Room Lighting

This feature adjusts the picture color according to the room lighting.

Note: When Picture Mode is set to AutoView, this feature will be available.

1 Y> PICTURE > Advanced Picture Settings >

OK .

2 Press B or b to select Smart Sensor Settings. Press

OK .

3 Press B or b to select Room Lighting.

4 Press C or c to select Auto, Incandescent, or Fluorescent. Press O.

Mode	Descriptiom
Auto	Smart Sensor detects incandescent and
	fluorescent room light automatically.
Incandescent	Picture color will be warmer.
Fluorescent	Picture color will be cooler.

55