Toshiba WX800U Network Connection Test, MAC Address, Advanced features, Auto setup, Manual setup

Chapter 8: Advanced features

Auto setup:

1 Y> PREFERENCES > Network Setup > OK .

2 Press B or b to select Advanced Network Setup. Press OK .

3 Press B or b to select DNS Setup. Press OK .

4 Select Auto Setup. Press C or c to select On.

Note: Other items will be grayed out when Auto Setup is set to On.

Manual setup:

1 Y> PREFERENCES > Network Setup > OK .

2 Press B or b to select Advanced Network Setup. Press OK .

3 Press B or b to select DNS Setup. Press OK .

4 Select Auto Setup. Press C or c to select Off.

5 Press B or b to highlight Primary DNS Address.

6 Press C or c to highlight the field you want to change, and then use the number buttons to input the Primary DNS Address. To save the setting, press OK .

Note:

•DNS address field numbers must be between 0 and

255.If you input an incompatible number and press OK , the field number will reset to the previous value.

7 Press B or b to highlight Secondary DNS Address, and edit in the same way as Primary DNS Address.

MAC Address

You can view the fixed MAC address for the TV, if one is installed.

1 Y> PREFERENCES > Network Setup > OK .

2 Press B or b to select Advanced Network Setup. Press OK .

3 Press B or b to select MAC Address. Press OK .

Network Connection Test

This function checks Internet connectivity.

1 Y> PREFERENCES > Network Setup > OK .

2 Press B or b to select Network Connection Test. Press OK .

Note: A message will appear to indicate if the connection was successful or if it could not be completed.

Note: The result of Network Connection Test does not always guarantee the connection. Depending on the situation, some Internet features may not be available.

To cancel the Network Connection Test:

Press Owhile searching for the Internet connection.

64