Toshiba 46WX800, WX800U Advanced Network Setup, Wireless Information, IP Address Setup, DNS Setup

Chapter 8: Advanced features

Wireless Information

The settings configured in Wireless Setup can be confirmed.

Note: When Network Type is Wireless, this menu is available from the Quick menu.

1 Press to open the Quick menu.

2 Press B or b to select Wireless Information. Press

OK .

3 When the AP connection succeeds, a Wireless Information screen will appear.

Note: Press the RED button to check the availability of surrounding APs.

Item	Description
	Connected is displayed when the TV is
Status	connected to the AP.
	Disconnected is displayed when the
	TV is disconnected to the AP.
Signal	Connection signal strength with AP
	(STRONG/MEDIUM/WEAK)
Speed	The link speed with AP
Mode	Working mode (11a, 11b, 11g, 11n)
Channel	A channel in use (1-165)
Network Name	SSID set
Authentication	Authentication set
Encryption	Encryption set
Security Key	Security Key set
AP MAC	The AP's MAC address is displayed
Address	when the TV is connected to AP.
TV MAC	The TV’s MAC address
Address
	Enabled is displayed when you use
DHCP	DHCP.
	Disabled is displayed when you do not
	use DHCP.
IP Address	The TV's IP address
Subnet Mask	Value of the Subnet Mask
Default	Default GATEWAY’s address
Gateway
DNS	DNS’s address

Note: Even if AP for IEEE 802.11n is used when Encryption is set to WEP or TKIP, the Speed value might be low. We recommend that the Encryption setting to be changed to AES (Under manual setup).

Advanced Network Setup

Note:

•When the DHCP function of the router connected with this TV is On, you can set Auto Setup to On or Off. (Usually set it to On.)

•When the DHCP function of the router is Off, set Auto Setup to Off, and manually set IP Address or DNS Address.

IP Address Setup

Auto Setup:

1 Y> PREFERENCES > Network Setup > OK .

2 Press B or b to select Advanced Network Setup. Press OK .

3 Press B or b to select IP Address Setup. Press OK . 4 Select Auto Setup. Press C or c to select On.

Note: Other items will be grayed out when Auto Setup is set to On.

Manual Setup:

1 Y> PREFERENCES > Network Setup > OK .

2 Press B or b to select Advanced Network Setup. Press OK .

3 Press B or b to select IP Address Setup. Press OK . 4 Select Auto Setup. Press C or c to select Off.

5 Press B or b to highlight IP Address.

6 Press C or c to highlight the field you want to change, and then use the number buttons to input the IP address. To save the setting, press OK .

Note:

•IP address field numbers must be between 0 and

255.If you input an incompatible number and press OK , the field number will reset to the previous value.

7 Press B or b to highlight Subnet Mask, and edit in the same way as IP Address.

8 Press B or b to highlight Default Gateway, and edit in the same way as IP Address.

Note: If you manually set the IP address, you must not use the same IP address for any other device. The IP address you use should be a private address. If you do not know the correct values to use, please contact your network administrator or internet service provider.

DNS Setup

Note: When the DHCP function of the router connected to this TV is Off, set Auto Setup to Off, and manually set the DNS address(es). Your internet service provider should have provided these to you.

63