Connecting a HDMI audio system, Connecting your TV

Chapter 2: Connecting your TV

Using the TV remote and REGZA-LINK®to control other devices

To control the basic functions of connected audio/video devices using the TV’s remote control, connect a REGZA- LINK® compatible audio receiver or playback device. The REGZA-LINK®feature uses the CEC technology as regulated by the HDMI standard.

		TV back panel
	Audio receiver
	HDMI IN HDMI OUT	Playback device
	HDMI IN HDMI OUT	(REGZA-LINK DVD player,etc.)
		(REGZA-LINK DVD player,etc.)
	Playback device	HDMI OUT
	Playback device
	(REGZA-LINK DVD player,etc.)
		HDMI
	HDMI OUT	cable
	HDMI OUT

To connect an audio receiver and playback devices, you will need:

•HDMI cables (- p. 15)

Note:

•If several devices are connected, the REGZA-LINK®feature may not operate properly.

•For proper operation, it is recommended that you use HDMI cables with the HDMI Logo ( ).

Before controlling the devices:

•For an explanation of setup and operations, see “Using REGZA-LINK®” (- p. 43). •Configure the connected devices. See each device’s operation manual.

Note: This feature is limited to models incorporating Toshiba’s REGZA-LINK. However, Toshiba is not liable for those operations. See the individual instruction manuals for compatibility information.

When using an external AV amplifier:

Picture and sound may not be properly synchronized. In this case, adjust the delay time of sound on the AV amplifier.

Note: Control range of the delay time differs according to the device you use.