Toshiba 46WX800, 55WX800, WX800U Setting Blue Screen, Adjusting POWER LED’s Dimmer, Basic features

Chapter 6: Basic features

Setting Blue Screen

When Blue Screen is set to On, the screen will turn blue and the sound will be muted when no signal is received.

1 Y> PREFERENCES > Blue Screen. 2 Press C or c to select On. Press O.

Note: Some external inputs may not mute the sound.

Adjusting POWER LED’s Dimmer

You can turn down the POWER LED's brightness.

1 Y> PREFERENCES > POWER LED Dimmer. 2 Press C or c to select On. Press O.

Note: This operation is available only in 2D viewing mode.

Displaying TV status information

To display TV status information:

Press .

The following information will display (if applicable): •Current input (ANT/CABLE, Video, etc.)

•If ANT/CABLE is the current input, either “CABLE” (for cable TV) or “ANT” (for over-the-air broadcasts).

•Channel number (if in ANT/CABLE mode) •Input label (if set)

•Digital signal strength indicator (bar graph in lower right corner of box; for ATSC signal only)

•Stereo, Mono or SAP audio status (when HDMI input mode, PCM)

•Video resolution

•Aspect ratio of incoming video signal (4:3 or 16:9) •V-Chip rating status

•GameTimer (if set)

•Current display mode (Side by Side, Top and Bottom, or Frame Packing)

•Current display format (3D or 3D to 2D) •Input video format (3D is displayed when video

format is 3D.)

To close the screen:

Press again.

The following additional information (only available for ANT/CABLE input) will display for off air digital channels (if applicable):

•Title

•Duration

•Detailed description

To display next program information for digital channels, press again. Pressing a third time will remove the entire banner.

ANT		SVGA 16:9 3D	NONE
2-2
		Nashville WX Channel	8:59am - 4:59pm EST
		Nashville WX Channel provides Middle Tenessee and Southern Kentucky
3D to 2D	Side by Side	weather.

Note: The location of the banner can be moved to the top or bottom of the screen by pressing B or b while the INFO display is onscreen. The last position will be stored to memory.

48