Toshiba 46WX800 LED indications, Troubleshooting, Wireless network problems, No light, Red blinks

Models: 46WX800 46WX800U 55WX800 55WX800U WX800U

1 106
Download 106 pages 18.71 Kb
Page 83
Image 83
Wireless network problems

Chapter 9: Troubleshooting

The network setup on the Server is incorrect. Make sure both the DMS and TV are using the same network type (DHCP/manual) and have compatible network settings.

Too many DMSs are connected. You cannot connect more than 32 sharing devices at one time.

The DMS is not turned ON.

The “server” is not a DMS device.

Check the firewall and streaming settings on the DMS.

Wireless network problems

Check that the router/AP (Access point) power is ON.

After starting wireless network setup, confirm that the network is configured properly by performing the network connection test (- p. 64).

Check the router/AP’s connection status (- p. 63).

If the router/AP does not support PBC or WPS, Easy Setup (PBC) will not work even if the push-button is pressed.

If available router/AP list is not displayed in Easy Setup (PIN) or Assisted Setup, the power of router/AP may be OFF. Check that it is ON, and then try re-starting the scan for available routers/APs.

Refer to the router/AP instruction manual.

NET TV or Widget problems

If the date and time display on the NET TV menu is wrong, turn off the TV, and turn it on again.

NET TV or Widgets may not be available after turning the TV on while the system is booting.

NET TV and Widgets are not available if Game or PC mode is selected on the TV.

Content delivered by NET TV or Widgets are the

responsibility of the Contents Service Provider. Contact the Service Provider to discuss any content issues.

Media Player problems

Ensure that the devices (Display and Server) are connected correctly.

Incorrect behavior may occur when using a USB HUB connection.

The size of pictures stored in the DMS may be

automatically changed by the DMS and improperly displayed. This is a result of the DMS.

Photo files that were processed and edited by using PC’s application software may not be able to be viewed.

When viewing content that supports two or more

formats the display may select one format automatically.

Copyright protected contents stored in the DMS may not be able to be played on the display.

Content playback stability may be affected by heavy network traffic.

Contents originally recorded on a PC may not play correctly.

Set the media sharing of the DMS correctly, according to the DMS instruction manual.

Confirm that the contents of either the DMS or the USB storage device are in formats that are supported by this TV (- p. 76, 77, or 79).

Depending on the DMS, access may be limited by the MAC address. Set the server according to the DMS’s instruction manual. This TV’s MAC Address can be

confirmed in the Network Setup portion of the User Menu (- p. 64).

For DLNA CERTIFIEDPlayer

Depending on the DMS, it may take time to display the list.

For DLNA CERTIFIEDRenderer

Depending the state of this TV, DMC may not be able to control a DMR playback.

If DMR playback starts regardless of the user's intention, check the access control of DMS or set Media Renderer to Off.

LED indications

The POWER and On Timer LED lights on the front of the TV indicate the TV’s status, as described below.

TV front

 

 

 

 

 

 

 

 

Touch Sensor

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

INPUT

 

 

 

 

 

 

 

 

 

 

 

 

VOL

 

Power

 

On Timer

 

MENU

CH

Touch Sensor (POWER LED)

Blue

The TV is operating properly.

No light

The power is off or standby.

Blue blinks

Fan Stopped. Turn off the TV and unplug the power cord. Plug the power cord in again and turn on the TV.

Red blinks

Power-On Failure. Turn off the TV and unplug the power cord. Plug the power cord in again and turn on the TV.

Note: To adjust the brightness of the POWER LED, see “Adjusting POWER LED’s Dimmer” (- p. 48).

Touch Sensor (except POWER LED)

White

Sensor is available.

On Timer LED

Green is ON (solid) On Timer is set.

Green blinks (if applicable)

Abnormal operation of BUS line. Turn off the TV and unplug the power cord. Plug the power cord in again and turn on the TV.

After trying the solutions, if the problem persists: •In the U.S., visit TACP Consumer Solutions on the

web at www.tacp.toshiba.com/customersupport/ or call 1-800-631-3811.

•In Canada, locate the nearest Toshiba authorized service depot by directing your web browser to www.toshiba.ca; click “Home Entertainment,” and then click “Support.”

83

Page 83
Image 83
Toshiba 46WX800, 55WX800 LED indications, Troubleshooting, Wireless network problems, NET TV or Widget problems, No light