Toshiba 55WX800 Skipping channels, Skipping video inputs, Manual Tuning, Setting up your TV, Type

Chapter 5: Setting up your TV

Option	Description
	Note: If you select Cable, auto tuning
	deletes previously stored channels from
	memory.
Cable	This setup requires some time, but you
	do not need to repeat the setup unless
	your cable TV service’s lineup changes
	significantly.
	Auto tuning retains stored channels and
	stores newly found channels into
Antenna	memory.
	To skip an antenna source channel from
	memory, set the channel to be skipped.
	See “Skipping channels”.

Note: To tune to channels not stored in memory, use buttons 0–9 and = on the remote control.

1 Y> SETUP > Auto Tuning > OK . A confirmation screen appears.

2 Press OK to start Auto Tuning or Oto abort.

The TV cycles through all the channels, and stores all active channels in memory.

To view the programmed channels, press <or ,.

Manual Tuning

After storing channels in memory, you can manually enter channels if the physical channel is known.

1 Y> SETUP > Manual Tuning > OK .

2 Use buttons 0–9 on the remote control to enter the channel number (for example, 56) and press OK .

3 Press OK to start Manual Tuning.

The channels found are listed at the bottom of the screen.

Type	Description
ATV	Analog channel.
DTV	Digital channel

Skipping channels

To prevent a channel from being viewed, you can set it to be skipped.

1	Y> SETUP > TV Settings > OK .
2 Press B or b to select Channel Options. Press					OK .
	The list of channels appears.
		Channel Options
		Ch.	Type
		5-1		DTV
		6
				ATV
		6-1
				DTV
		8
				ATV
		9
				ATV
		10
				ATV
		11
				ATV
		12
				ATV
3
	Press B or b to select a channel to skip. Press OK .
	The box is selected. To clear the selection, press				OK .

Note: You cannot tune to skipped channels using <or ,. Use buttons 0–9 and = on the remote control.

Skipping video inputs

You can set video inputs to be skipped over when selecting inputs in the Input selection window.

To turn on skip:

1 Y> PREFERENCES > AV Connection > OK . 2 Press B or b to select Input Labeling. Press OK .

3 Press B or b to select the item you want to be skipped. Press the RED button to turn on Skip.

To turn off skip:

1 Y> PREFERENCES > AV Connection > OK . 2 Press B or b to select Input Labeling. Press OK .

3 Press B or b to select the skipped item. Press the RED button to turn off Skip.

30