Toshiba 55WX800U, 46WX800U Using Media Player with DLNA CERTIFIED Server, Advanced features

Chapter 8: Advanced features

Using Media Player with DLNA CERTIFIED™ Server

You need to configure a home network before using this feature (- p. 23).

1 Y> APPLICATIONS > Media Player > OK .

2 Press B or b to select Photo, Movie, or Music. Press OK . The thumbnail (for Photo) or list of files (for Movie and Music) appear.

3 If there is more than one media server on the network, a list of all media servers will be displayed. Select the server you want to use, and press OK .

Press B or b to select DMS if the selection window is displayed.

To select a file in the list of contents:

1 Press B, b, C or c to select a file or folder.

2 Press OK to move to the next layer, or press to return to the previous layer.

To close the Media Player:

Press O. The TV will return to the last-viewed channel or video input.

To display the device information:

1 Press to open the Quick menu in list mode or Multi View mode.

2 Press B or b to select Device Information.

Setting DLNA CERTIFIED™ Server waking up

You only need to complete the Media Server Setup if you wish to use the "Wake-on-LAN" feature.

1 Y> APPLICATIONS > Media Player > OK .

2 Press B or b to select Setup. Press OK .

3 Press B or b to select Media Server Setup. Press OK . The list that contains the currently active DMSs and the registered DMSs appears.

4 Press B or b to select the desired device. Press OK . The box is selected. To clear the selection, press OK .

5 Press c to select Done. Press OK .

Note:

•The setting is not saved when is pressed before Done is pressed.

•Up to 8 DMSs can be selected.

•Even if the device checked is powered off, it will be displayed but grayed out in the Select Device window. When OK is pressed on a highlighted grayed out item, a confirmation of Wake-on-LAN is displayed. The TV tries to wake up the DMS if Yes is pressed. The Server will start if it supports Wake-on-LAN feature.

•Depending on the hardware/software configuration of the Media Server, it may not start even if Wake-on-LAN is sent.

•When some DMSs are connected, it may take time until the list is displayed. The list may be refreshed by the following operation.

-The device selection window is closed once and it is displayed again.

-The RED button is pressed.

74