SMC Networks BLW-54MF manual Set Wireless Connection, Setup Completed

Page 24

4.5 Set Wireless Connection	2
Step 5 Choose if you want to use wireless connection.
Step 5 Choose if you want to use wireless connection.

Wireless You may choose if you want to enable wireless function to let users connect with BLW-54MF through wireless network.

SSID Every SSID is unique in the WLAN (SSID can be 16-digit ASCII characters and case-sensitive). SSID can prevent two nearby WLAN from combining to be one. You can give BLW-54MF an SSID, and only whose SSID is the same with it can connect with it.

Channel Here shows the channels provided by the local wireless connection. The setting of the channels of the wireless network should be the same as the wireless APs.

Next Click this button to save the settings and go to next page.

4.6 Setup Completed

Step 6 After completing the five steps above, please click Restart to save all the settings and restart the system. When restarting the system, please do not close the window or unplug the power cord. The system will ask you to click Close to go back to the homepage and show the latest system status after restarting.

19

Chapter 2 Basic Setup & Configuration

Image 24

Contents Page USER’S Manual Foreword Trademarks Contents Advanced Setup & Configuration Introduction Package Contents Support AP/Router Switching Introduction to BLW-54MFSupport EZ-GO Eazy Go to Link Function Support WDS, RepeaterSupport Wireless Authentication Support English/Chinese Language Switching FunctionSupport Anti-DoS Function Support Virtual Server & DMZProduct Housing Front Panel LEDs Status MeaningRear Panel Ports Function 2Basic Setup & Configuration Hardware Installation Choose a Proper Installation SiteClients Computer Setup Power OnConnect LAN Cables Connect WAN CableMS-DOS Web Configuration Basic Setup & Configuration Setup Wizard Set Password Choose Time ZoneSet LAN & Dhcp Server Select Internet Connection Type Select Internet Connection TypeObtian IP automatically Dhcp client Fixed IP address PPPoE BLW-54MF Set Wireless Connection Setup CompletedChoose if you want to use wireless connection BLW-54MF Main LAN & Dhcp ServerWAN Dhcp Client or Fixed IPPPPoE BLW-54MF Pptp BLW-54MF L2TP BLW-54MF BigPond Cable Password Time Wireless Dynamic DNSBasic 802.11 b Authentication AuthenticationWEP, WPA, WPA2, and WPA-AUTO PSK. After selecting WEPMode Key1~4Shared WPAWPA2 WPA-AUTO Authentication Protocol. a protocol that acts as a framework Advanced Dtim Dtim Dtim APStatus Device Information2 Log Log Setting Wireless Statistic3Advanced Setup & Configuration Routing StaticDynamic Access DisabledRouting Table FiltersOnly deny computers with MAC address listed below to URL BlockingURL string pattern to be blocked IP FiltersAllow Users to access all domains except Blocked Domains Domain BlockingDeny users to access all domains except Permitted Domains Protocol FiltersVirtual Server Enabled You can choose to Enabled or Disabled this UDPSpecial AP Or UDP typeDMZ DMZ Host IPFirewall Rule Settings ManagementLoad Settings OpenLoad Restore Factory Default Settings EZ-GOBLW-54MF InstallShield Wizard Complete window BLW-54MF Advanced Setup & Configuration If you wan to continue connecting GW-US54SG with BLW-54MF Advanced Setup & Configuration Remote Management Cancel IdentFirmware Tools RestartPing Test DNS Lookup 4AP Setup & Configuration Be configured and cannot be configuredRemote Management cannot be configured