Enabled You can choose to Enabled or Disabled this |
|
function. |
|
Name If you want to add a new server and its collocated port number, | 3 |
| |
please enter a service name here. |
|
| |
Protocol You can set the protocol of the virtual server to be TCP or |
|
UDP. |
|
Private Port Enter the port number that you want to set for virtual |
|
server port which might be different from the external port number. |
|
It can be a single port number or a range of ports. When receiving an |
|
incoming packet corresponding with the specific port number, the packet |
|
will be transferred to the appointed port. |
|
Public Port Enter the port number used for Internet application, for |
|
example, port 20 which is usually used for FTP, port 80 for WWW, and |
|
so on. If applications require multiple ports, you should assign a range of |
|
port for it. |
|
LAN Server Please enter the IP address of the server on the LAN side |
|
which provides virtual server service. |
|
Add Click this button to add a server, and the server will be listed on |
|
the list under the page. |
|
Update Update the modification you have made to the Virtual Server |
|
function. |
|
Delete Delete the Virtual Server you set before. |
|
Cancel If you do not want to do this setting right now, you may click |
|
this button to exist. |
|
53
Chapter 3 Advanced Setup & Configuration