many Internet Service Providers (ISPs). RADIUS setup is used to set up additional parameters for authorizing wireless clients through RADIUS 2 server. The RADIUS setup is required when you select to use WPA authentication.
Cancel If you do not want to configure this setting right now, click this button to exist this page.
Apply Click this button to save/apply the settings and restart the system.
6.3 Advanced
Beacon Interval Beacon Interval is the amount of time between beacon transmissions. Before a station enters power save mode, the station needs the beacon interval to know when to start up again and receive the beacon.
RTS Threshold Here you can define the minimum value of RTS (Request to Send) packets and prevent Hidden Nodes problems. Please enter a value between 0~2346, and when the packets are bigger than the RTS value the function will start to work.
Fragment Threshold This value can define the maximum packet sized, so the packets bigger than this size will be segmented. If you set the lower value, and found there is higher packets error value, you can set the value higher, however, that may decrease the whole performance of
39