SMC Networks BLW-54MF manual

2

Auto-reconnectWhen BLW-54MF disconnects with your xDSL

service, you can chose to reconnect online automatically, manually or connect-on-demand. If you choose Always-On , BLW-54MF Wireless Router will automatically reconnect to your ISP when you restart the system or the connection is stopped. Manual means you have to reconnect through your own configuration. Connect-On- Demand means when there is a need (e.g. open a web browser), and then the system may reconnect.

Idle Time Out Idle Time Out means a period of idle time before you go offline. Enter a maximum period of time (minutes) to define the maximum idle time. If the idle time is above the defined maximum idle time, it will go offline immediately. You can set the value to be 0 or Auto Reconnect to disable this function.

MTU MTU means Maximum Transmission Unit, the largest physical packet size, measured in bytes, which a network can transmit. The default value is 1400. Please set up the MTU according to your system environment. Only enter a new MTU when your ISP requires, otherwise, please leave it as the default setting. When using PPPoE connection, you may need to change MTU settings to maintain the connection with your ISP, however, if the incorrect value was entered, you may be unable to access certain websites. Reducing the packet size can help connecting to certain websites or speeding up the transmission rate.

Cancel If you do not want to configure this setting right now, click this button to exist this page.

Apply Click this button to save/apply the settings and restart the

system.

28

BLW-54MF