SMC Networks BLW-54MF manual

Page 29

2

Verify Password Please enter the Password again.

DNS 1~3 You may enter the first, second, and third DNS Server provided by your ISP.

Auto-reconnectWhen BLW-54MF disconnects with your xDSL service, you can chose to reconnect online automatically, manually or connect-on-demand. If you choose Always-On , BLW-54MF Wireless Router will automatically reconnect to your ISP when you restart the system or the connection is stopped. Manual means you have to reconnect through your own configuration. Connect-On- Demand means when there is a need (e.g. open a web browser), and then the system may reconnect.

Idle Time Out Idle Time Out means a period of idle time before you go offline. Enter a maximum period of time (minutes) to define the maximum idle time. If the idle time is above the defined maximum idle time, it will go offline immediately. You can set the value to be 0 or Auto Reconnect to disable this function.

MTU MTU means Maximum Transmission Unit, the largest physical packet size, measured in bytes, which a network can transmit. The default value is 1492. Please set up the MTU according to your system environment. Only enter a new MTU when your ISP requires, otherwise, please leave it as the default setting. When using PPPoE connection, you may need to change MTU settings to maintain the connection with your ISP, however, if the incorrect value was entered, you may be unable to access certain websites. Reducing the packet size can help connecting to certain websites or speeding up the transmission rate.

Cancel If you do not want to configure this setting right now, click this button to exist this page.

Apply Click this button to save/apply the settings and restart the

system.

24

BLW-54MF

Image 29
Contents Page USER’S Manual Foreword Trademarks Contents Advanced Setup & Configuration Introduction Package Contents Introduction to BLW-54MF Support AP/Router SwitchingSupport EZ-GO Eazy Go to Link Function Support WDS, RepeaterSupport English/Chinese Language Switching Function Support Wireless AuthenticationSupport Anti-DoS Function Support Virtual Server & DMZFront Panel LEDs Status Meaning Product HousingRear Panel Ports Function Choose a Proper Installation Site 2Basic Setup & Configuration Hardware InstallationPower On Clients Computer SetupConnect LAN Cables Connect WAN CableMS-DOS Web Configuration Basic Setup & Configuration Setup Wizard Choose Time Zone Set PasswordSet LAN & Dhcp Server Obtian IP automatically Dhcp client Select Internet Connection TypeSelect Internet Connection Type Fixed IP address PPPoE BLW-54MF Choose if you want to use wireless connection Set Wireless ConnectionSetup Completed BLW-54MF LAN & Dhcp Server MainDhcp Client or Fixed IP WANPPPoE BLW-54MF Pptp BLW-54MF L2TP BLW-54MF BigPond Cable Password Time Basic WirelessDynamic DNS 802.11 b Authentication AuthenticationWEP, WPA, WPA2, and WPA-AUTO PSK. After selecting WEPKey1~4 ModeShared WPAWPA2 WPA-AUTO Authentication Protocol. a protocol that acts as a framework Advanced Dtim Dtim AP DtimDevice Information Status2 Log Log Setting Statistic WirelessStatic 3Advanced Setup & Configuration RoutingDynamic Disabled AccessRouting Table FiltersURL Blocking Only deny computers with MAC address listed below toIP Filters URL string pattern to be blockedDomain Blocking Allow Users to access all domains except Blocked DomainsProtocol Filters Deny users to access all domains except Permitted DomainsVirtual Server UDP Enabled You can choose to Enabled or Disabled thisOr UDP type Special APDMZ Host IP DMZFirewall Rule Management SettingsLoad Load SettingsOpen EZ-GO Restore Factory Default SettingsBLW-54MF InstallShield Wizard Complete window BLW-54MF Advanced Setup & Configuration If you wan to continue connecting GW-US54SG with BLW-54MF Advanced Setup & Configuration Remote Management Ident CancelFirmware Ping Test ToolsRestart DNS Lookup Be configured and cannot be configured 4AP Setup & ConfigurationRemote Management cannot be configured