Sears 113.21308 manual Unpacking and checking contents

unpacking and checking contents

WARNING: TO AVOID INJURY FROM UNEX-

PECTED STAF_TING OR ELECTRICAL SHOCK, DO NOT PLUG THE POWER CORD iNTO A SOURCE OF POWER. THiS CORD MUST REMAIN UNPLUG-

GED WHENEVER YOU ARE WORKING ON THE DRILL PRESS.

Model 113.213080 Drill Press is shipped complete in one box.

1.Unpacking and Checking Contents

a. Separate all "loose parts" from packaging mate- rials and check each item with "Table of Loose

TABLE OF LOOSE PARTS

item		Description	Qty.
A	Table/Support	Asm	1		,,_
B	Column Support Asm		1	=
C	Owner's Manual		1	_	"_
D	Box of Loose	Parts	1	.=_ o
E	Base		1	"_
F	Head Asm		1	__ L,_
G	Bag of Loose Parts		t	:_	_'

Parts" to make sure all items are accounted for, before discarding any packing material.

WARNING: iF ANY PARTS ARE MISSING, DO NOT

ATTEMPT TO ASSEMBLE DRILL PRESS, PLUG IN

THE POWER CORD, OR TURN THE SWITCH ON

UNTIL THE MISSING PARTS ARE OBTAINED AND

ARE iNSTALLED CORRECTLY.

2.Remove the protective oil that is applied to the table and column. Use any ordinary household type grease and spot remover.

WARNING: TO AVOID FIRE OR TOXIC REAC-

TION, NEVER USE GASOLINE, NAPTHA OR

SiMiLAR HIGHLY VOLATILE SOLVENTS.

3.Apply a coat of paste wax to the table and column to prevent rust. Wipe all parts thoroughly with aclean dry cloth.

C)

\	.....--B
F

C