Sears 113.21308 manual Aged iN ANY WAY, have IT Replaced IM, Mediately

Page 22

maintenance

WARNING FOR YOUR OWN SAFETY, TURN SWITCH "OFF" AND REMOVE PLUG FROM POWER

SOURCE OUTLET BEFORE MAINTAINING OR LUB- RiCATiNG YOUR DRILL PRESS.

Frequently blow out any dust that may accumulate in- side the motor.

A coat of furniture-type paste wax applied to the table and column will help to keep the surfaces clean.

WARNING: TO AVOID SHOCK OR FiRE HAZARD, iF THE POWER CORD iS WORN OR CUT, OR DAM-

AGED iN ANY WAY, HAVE IT REPLACED IM-

MEDIATELY.

MOTOR CORD

C.... TBLACK

POWER CORD

Wiring Diagram

lubrication

All of the BALL BEARINGS are packed with grease at the factory. They require no further lubrication.

Periodically lubricate the SPLINES (grooves) in the spindle, and the RACK (teeth of the quill).

SPINDLE ASSEMBLY OF DRILL PRESS

.,_.._._._ SPLINES

RACK

"----- (TEETH)

" _"_--"-

CHUCK

Sears Recommends the Following Accessories

Drill Bits

See

Catalog

Hold-Down

and Guide

 

9-2457

Drill Press

Vises

See

Catalog

5 pc. Stop

Collar Set

See Catalog

Sanding Drums

9-2497 - 9-2498

15 Piece Drum Sanding Kit

See Catalog

Clamping Kit

See

Catalog

Buffing Wheels up to 4" dia. max

See

Catalog

Power Tool Know-How Handbook

 

9-29117

Sears may recommend other accessories not listed in the manual.

See your nearest Sears store or Catalog department for other accessories.

Do not use anyaccessory unless you have received and

read complete instructions for its use.

22

Image 22
Contents Save This Manual Repair partsT3.2!3080 Part No. SP5184Full ONE Year Warranty on Craftsman Drill Press Protection Eyes, Hands, Face, Ears and Body Do not wear Additional safety instructions for driJl pressesNecktie Loose clothing Jewelry Right Side of the Head RPMDrill press is being used Contents Connecting to Power Source Outlet Meter specifications and e ectricaJ requirementsMotor SPECIFmCATmONS Unpacking and checking contents Description Qty Head Belt Tension Lock HandlesSupport Lock Handle ALL Assembly Steps are Completed Assembly of BASE/COLUMNInstallation of TABLE/SUPPORT Assembly and Hardware Tools NeededINSTALLiNG the Head INSTALLiNG Feed Handles INSTALLING the ChuckINSTALLING Belt Guard Knob Tensioning BeltAdjusting the Table Square to Head Adjustment Feedchuck Spring Getting to know31OORPM Insert KEY into switch Drilling to Depth Removing the ChuckAnother WAY -- Depth Scale INSTALLING Drills Basic dr!IS press operationPOSITiONiNG Table and Workpiece Tilting TableQuill Return Spring AdjustmentsHole Location FeedingAged iN ANY WAY, have IT Replaced IM MediatelyTrouble shooting Probable CauseModel no Parts List for Craftsman 8 Drill Press1815 2019 Key J Part No. I No Parts LiST for Craftsman 8 Drill PressAlways order by Part Number--Not by Key Number Description Key PartKey Part Description Insert-PulleyParts List for Craftsman 8 Drill Press Repair partsBy Key Number Part Model NO. !t3.2t3080 Partdescription