b. Drum sanders must NEVER be operated on this driU press at a speed greater than 1800
RPM
c.Do not install or use any drill that exceeds 7" in length or extends 6" below the chuck jaws, They can suddenly bend outward or break.
d.Do not use wire wheels, router bits. shaper cut- ters, circle (fly) cutters or rotary planers on this drill press.
11.Note and Follow the Safety Warnings and In- structions that Appear on the Panel on the
Right Side of the Head:
f
O
oFOR YOUR OWN SAFETY:
KnowThis Tool! Read and Understand Owner'sManual beforeUsing this
Machine.Use Recommended Drill Speed- SeeChart Inside Pulley Cover.
m Always wear safety goggles that comply with ANSI Z87.1
m Donotwear gloves,necktie or looseclothing.Tie back _E
long hair. | |
= Securelyclamp work to table if itis too shorttocontact |
|
the column when in operating position. |
|
!Securely lock head and support to column, and table to support, before operating drillpress.
O m Use only recommended accessories. | F_82443O |
12. This Drill Press has 3 speeds as listed below:
620RPM
1300 RPM
3100 RPM
See inside of guard for specific placement of belt on pulleys.
13.Think Safety. Safety is a combination of operator common sense and alertness at all times when the
drill press is being used,
WARNING: DO NOT ALLOW FAMILIARITY (GAINED
FROM FREQUENT USE OF YOUR DRILL PRESS)
TO BECOME COMMONPLACE. ALWAYS RE- MEMBER THAT A CARELESS FRACTION OF A
SECOND IS SUFFICIENT TO INFLICT SEVERE INJURY.
The operation of any power tool can resutt in foreign objects being thrown into the eyes. which can result _n
severe eye damage. Always wear safety goggles com- ply with ANSI Z87.1 (shown on Package) before corn-
mencing power tool operation. Safety Goggles are available at Sears retail or catalog stores.