Sears manual Model no, 113.213710, Drill Press only, DRI LL Press with HP Motor

Page 1

MODEL NO. ]]3.21371

DRILL PRESS ONLY

113.213710

DRI LL PRESS WITH

1/2 HP MOTOR

Serial

Number ......................

Model and serial number may be found at the rear of the head.

You should record both model and serial number in a safe place for future use.

CAUTION:

Read GENERAL

and ADDITIONAL

SAFETY

INSTRUCTIONS

carefully

®

15-1/2 INCH

DRILL PRESS

•assembly

•operating

=repair parts

Sold by SEARS, ROEBUCK AND CO., Chicago, IL. 60684 U.S.A.

Part No. 71189

_" ' -::;_ / _. ;_

Image 1

Contents 113.213710 Model noDrill Press only DRI LL Press with HP MotorOr power tools For Your OWN SAFETY, do not Additionam safety instructions for drill pressesAttempt to Operate Your Drill Press Until YOU have Read and Understand FollowingUnpacking checking Additional safety instructions for drill pressesRPM Volts Catalog no Connecting to Power Source OutletCutting Tool Check Motor RotationAssembly Spindle Nose Locking Collar Chuck Chuck KEY Chuck Body Raising the Head Installing the Depth StopScrew the Thumb Screw partways into the Depth Pointer 10, Tighten the Head Lock Handle and the Quill Lock Handle Installing Motor PulleyTighten the Quill Lock Handle Keyway GrooveMounting the Motor AssembtyExcessive Tightness could Bend the Motor Mount Grease Installing and Tensioning BeltBelt Tensioning ROD Getting Know Your Drill Press Spindle Speed ChartThumbscrew Head Lock Handle ... locks the head to the column Getting to know your drill pressTablelock Handle ,, locks the table to the column Another WAYBack on Removingthe ChuckInstalling Drills Observe the Following Safety PrecautionsOperation Positioning Table and WorkpieceHole LOCAT!ON AdiustmentsBelt Tension Lubrication Recommended accessoriesOutlet Before Maintaining or Lubricating Your Drill Press WheelOutlet Before Trouble Shooting Trouble shootingParts List for Craftsman Drill Press Model no .21371 STD Parts List for Craftsman Drill Press Model no .21371STD RPMKey Parts List for Craftsman Drill Press71075 Spindle ASSEMBLY, Stop Parts List for Craftsman Drill Press Model no .21371Part 113.2!3710Model Number Name Inch Drill