Sears 113.21371 manual Spindle Nose Locking Collar Chuck Chuck KEY Chuck Body

Page 7

2.Apply a light film of oil such as Sears household oil to the spindle nose.

3.Place the chuck on the spindle nose and screw the locking collar up as far as it will go.

4.Insert a piece of 1/4" dia. STEEL ROD in to one of the holes in the chuck body.

5.Insert the CHUCK KEY into one of the holes in the

collar ...TURN IT IN THE DIRECTION OF ARROW UNTIL IT IS TIGHT.

6.To remove chuck, turn the collar in the opposite direction until the chuck is ejected from the spindle.

SPINDLE NOSE

LOCKING COLLAR

CHUCK

LOCKING COLLAR

CHUCK KEY

CHUCK BODY

iNSTALLING FEED HANDLES

1.Screw a FEED HANDLE into each of the threaded holes in the hub, and tighten.

QUILL LOCK

HANDLE

Image 7

Contents DRI LL Press with HP Motor Model no113.213710 Drill Press onlyOr power tools YOU have Read and Understand Following Additionam safety instructions for drill pressesFor Your OWN SAFETY, do not Attempt to Operate Your Drill Press UntilUnpacking checking Additional safety instructions for drill pressesCheck Motor Rotation Connecting to Power Source OutletRPM Volts Catalog no Cutting ToolAssembly Spindle Nose Locking Collar Chuck Chuck KEY Chuck Body Raising the Head Installing the Depth StopScrew the Thumb Screw partways into the Depth Pointer Keyway Groove Installing Motor Pulley10, Tighten the Head Lock Handle and the Quill Lock Handle Tighten the Quill Lock HandleMounting the Motor AssembtyExcessive Tightness could Bend the Motor Mount Grease Installing and Tensioning BeltBelt Tensioning ROD Getting Know Your Drill Press Spindle Speed ChartThumbscrew Another WAY Getting to know your drill pressHead Lock Handle ... locks the head to the column Tablelock Handle ,, locks the table to the columnBack on Removingthe ChuckPositioning Table and Workpiece Observe the Following Safety PrecautionsInstalling Drills OperationHole LOCAT!ON AdiustmentsBelt Tension Wheel Recommended accessoriesLubrication Outlet Before Maintaining or Lubricating Your Drill PressOutlet Before Trouble Shooting Trouble shootingParts List for Craftsman Drill Press Model no .21371 RPM Parts List for Craftsman Drill Press Model no .21371STD STDKey Parts List for Craftsman Drill Press71075 Spindle ASSEMBLY, Stop Parts List for Craftsman Drill Press Model no .21371Inch Drill 113.2!3710Part Model Number Name