Engine Starting Notes, Operating instructions

11.4Clean and store the charger in a dry location.

Note: During the starting sequence listed above, the charger is set to one of three states.

11.5Engine Starting Notes:

•Wait for cranking - The charger waits until the engine is actually being cranked before delivering 80 amps for engine start. The charger delivers charge at a rate of up to 12 amps while waiting and will reset if the engine is not cranked within 15 minutes. (If the charger resets, it sets itself for a 2A charge and 12V Regular battery.) While waiting for cranking, the digital display shows the battery voltage (it can’t be set to percent).

•Cranking - When cranking is detected, the charger will automatically deliver up to its maximum output (at least 80A) as required by the starting system for up to 5 seconds or until the engine cranking stops. The digital display shows a countdown of the remaining crank time in seconds. It starts at 5 and counts down to 0.

•Cool Down - After cranking, the charger enters a mandatory 3-min- ute (180 second) cool down state. During this period, no settings can be changed. The buttons are ignored. The digital display indicates the remaining cool down time in seconds. It starts at 180 and counts down to 0. The 80A START LED blinks once every second. During the cool down period, no current is delivered to the battery. After 3 minutes, the 80A START LED will stop blinking and will light continuously, indicating that another crank cycle can be started. The digital display will change from displaying the countdown back to displaying the battery voltage. The CHARGING LED will then be lit.

12.operating instructions

OVERVIEW:

Using this battery charger is very simple. First, connect the battery and AC power following the precautions listed in sections 6 and 7. Then select the appropriate BATTERY TYPE and CHARGE RATE for your battery. The charger will then do everything automatically. This section explains a few details.

12.1CHARGING: If the charger does not detect a properly connected battery, the CHECK (red) LED will light continuously until such a battery is detect- ed. Charging will not begin while the Check LED is on. When charging begins, the CHARGING (yellow) LED will be lit.

12.2AUTOMATIC CHARGE: When the 2A, 12A or 30A charge rate is selected, the charger is set to perform an automatic charge. When an automatic charge is performed, the charger switches to the maintain mode (see below) automatically after the battery is charged.

12.3ABORTED CHARGE: If charging can’t be completed normally, charg- ing will abort. When charging aborts, the charger’s output is shut off and the CHECK (red) LED and digital display will blink on and off (at opposite times). In that state, the charger ignores all buttons. To reset after an

•9 •

200.71225 specifications

The Sears 200.71225 is a classic representation of consumer electronics from the late 20th century, particularly relevant to those who remember the impact of compact and efficient devices that met everyday needs. This versatile product embodies a range of features and technologies designed for convenience and functionality.

One of the primary characteristics of the Sears 200.71225 is its compact design. It was engineered to fit seamlessly in various environments, whether in a small apartment, a dorm room, or a family home. The dimensions allow for easy placement on desks, countertops, or storage shelves, making it an ideal choice for users with space limitations.

The 200.71225 is known for its user-friendly interface. The design focuses on simplicity, ensuring that even those who are not technologically savvy can navigate its features with ease. The control panel is clearly labeled, with large buttons that are easy to press. This emphasis on usability makes it accessible to a wide demographic, including children and the elderly.

In terms of technology, the Sears 200.71225 incorporates the latest advancements of its time, which may include solid-state components for reliability and durability. The integrated circuits are designed for optimal performance, enhancing the overall functionality of the device. Additionally, energy efficiency was a consideration in its design, allowing users to enjoy its features without significantly increasing energy bills.

The Sears 200.71225 also stands out in its versatility. It may come equipped with multiple functions, enabling users to perform a variety of tasks efficiently. This could include features like timer settings for various operations, enhancing its utility in everyday life. Whether it's a kitchen application, audio playback, or a simple home appliance, this device serves multiple purposes, making it a valuable addition to any household.

Durability is another key aspect of the Sears 200.71225. Built with quality materials, it is designed to withstand regular use, ensuring longevity and reliability. Maintenance is straightforward, with easy access for cleaning and repairs, which further adds to its appeal.

In conclusion, the Sears 200.71225 is a quintessential product that reflects the blend of practicality, technology, and user-centric design. Its compact size, ease of use, energy efficiency, multifunctionality, and robust construction make it a noteworthy choice for consumers looking for reliable electronics that seamlessly integrate into their daily lives. Whether as a nostalgic reminder of past innovations or as a practical solution today, the Sears 200.71225 remains a classic in the realm of consumer electronics.