Sears 200.71225 operating instructions

Page 12

aborted charge, either disconnect the battery or unplug the charger.

12.4DESULFATION MODE: If a battery is left discharged for an extended period of time, it could become sulfated and not accept a normal charge. If the charger detects a sulfated battery, the charger will switch to a special mode of operation designed for such batteries. Activation of the special desulfation mode is indicated by the CHARGING (yellow) LED blinking.

If successful, normal charging will resume after the battery is desulfated. The CHARGING (yellow) LED will then stop blinking and light continu- ously. Desulfation could take up to 10 hours. If desulfation fails, charging will abort and the CHECK (red) LED will blink.

12.5COMPLETION OF CHARGE: Charge completion is indicated by the CHARGED (green) LED. When lit, the charger has stopped charging and switched to the Maintain Mode of operation. If the 12V DEEP CYCLE battery type was selected for other charge types, the CHARGED (green) LED comes on when the battery is charged enough for normal use.

12.6MAINTAIN MODE: When the CHARGED (green) LED is lit, the charger has started Maintain Mode. This mode of operation is also known as

Float-Mode Monitoring. In this mode, the charger keeps the battery fully charged by delivering a small current, when necessary. The voltage

is maintained at a level determined by the BATTERY TYPE selected. NOTE: For charge types other than Deep Cycle, the charged LED might be lit before Maintain Mode is started.

12.7GENERAL CHARGING NOTES: The charger is designed to control its cooling fan for efficient operation. Consequently, it is normal for the fan to start and stop when maintaining a fully charged battery. The fan does not run in Tester Mode.

If the charge mode is changed after charging has started (by pressing the CHARGE RATE or BATTERY TYPE button), the charging process will restart.

The voltage displayed during charging is the charging voltage and is usually higher than the battery’s resting voltage.

• 10 •

Page 11 Page 13
Image 12
Page 11 Page 13
Contents OPERATOR’S Manual Table of Contents Important Safety Instructions Personal Precautions DC Connection Precautions Preparing to ChargeCharger Location Follow These Steps When Battery is Installed in ve- hicle Page Page AC input rating Features Assembly instructionsUsing the engine start feature Engine Starting Notes Operating instructionsOverview Page Display Mode Button Battery Type ButtonCharger controls Charge Rate Button Using the built-in alternator to test alternator output Testing Sequence Alternator Testing NotesBattery percent and charge time Charging tips Maintenance instructions Storage instructionsTroubleshooting Problem Possible Cause Solution

200.71225 specifications

The Sears 200.71225 is a classic representation of consumer electronics from the late 20th century, particularly relevant to those who remember the impact of compact and efficient devices that met everyday needs. This versatile product embodies a range of features and technologies designed for convenience and functionality.

One of the primary characteristics of the Sears 200.71225 is its compact design. It was engineered to fit seamlessly in various environments, whether in a small apartment, a dorm room, or a family home. The dimensions allow for easy placement on desks, countertops, or storage shelves, making it an ideal choice for users with space limitations.

The 200.71225 is known for its user-friendly interface. The design focuses on simplicity, ensuring that even those who are not technologically savvy can navigate its features with ease. The control panel is clearly labeled, with large buttons that are easy to press. This emphasis on usability makes it accessible to a wide demographic, including children and the elderly.

In terms of technology, the Sears 200.71225 incorporates the latest advancements of its time, which may include solid-state components for reliability and durability. The integrated circuits are designed for optimal performance, enhancing the overall functionality of the device. Additionally, energy efficiency was a consideration in its design, allowing users to enjoy its features without significantly increasing energy bills.

The Sears 200.71225 also stands out in its versatility. It may come equipped with multiple functions, enabling users to perform a variety of tasks efficiently. This could include features like timer settings for various operations, enhancing its utility in everyday life. Whether it's a kitchen application, audio playback, or a simple home appliance, this device serves multiple purposes, making it a valuable addition to any household.

Durability is another key aspect of the Sears 200.71225. Built with quality materials, it is designed to withstand regular use, ensuring longevity and reliability. Maintenance is straightforward, with easy access for cleaning and repairs, which further adds to its appeal.

In conclusion, the Sears 200.71225 is a quintessential product that reflects the blend of practicality, technology, and user-centric design. Its compact size, ease of use, energy efficiency, multifunctionality, and robust construction make it a noteworthy choice for consumers looking for reliable electronics that seamlessly integrate into their daily lives. Whether as a nostalgic reminder of past innovations or as a practical solution today, the Sears 200.71225 remains a classic in the realm of consumer electronics.
Top Page Image Contents