Sears 200.71225 operating instructions Using the built-in alternator to test alternator output

Page 15

14.2TESTER AND CHARGER: When first turned on, the 71225 operates only as a tester, not as a charger. To continue to use it as only a tester, avoid pressing the charge rate button. Selecting a charge rate activates the battery charger and deactivates the tester. Pressing the CHARGE RATE but- ton when the 80A Start LED is lit (except during the 180 second cool down) will shut off the charger and activate the tester.

14.3POWER-UP IDLE TIME LIMIT: If no button is pressed within 15 minutes after the battery is first powered up, the charger will automatically switch from tester to charger, if a battery is connected. In that case, the battery will be set for the 2A charge rate and 12V regular battery type.

14.4TESTER WITHOUT TIME LIMIT: If either the Display Mode or Bat- tery Type button is pressed within the first ten minutes after the battery is powered up, the unit will remain a tester (not a charger) indefinitely, unless a charge rate is selected.

14.5TESTING AFTER CHARGING: After the unit has been changed from tester to charger (by selecting a charge rate), it remains a charger. To change the battery back to a tester, press the CHARGE RATE switch until all charge rate LEDs are off.

14.6TESTER STATUS LEDs: When the 71225 is operating as a battery tester, the status LEDs light under the following conditions:

The CHARGED (green) LED will light if a charged battery is tested.

The CHARGING (yellow) LED does not light in the battery test mode.

The CHECK (red) LED lights unless a properly connected battery is de- tected.

When the tester display mode is set to voltage, the CHARGED and CHARGING LEDs won’t light.

14.7INITIAL PERCENT CALCULATION: When a battery % is calculated for the first time after connecting a battery, the digital display will show three dashes (“---”) for a period as long as several seconds while the tester analyzes the battery.

15.using the built-in alternator to test alternator output

This battery charger has a built-in alternator tester that displays an esti- mate of the alternator’s relative output compared to normal alternators. The Alternator % values displayed should be taken as general reference, not precise diagnosis. The alternator tester functions the same as the built-in volt meter (see previous section of this manual for details) with a few differences.

13

Image 15
Contents OPERATOR’S Manual Table of Contents Important Safety Instructions Personal Precautions DC Connection Precautions Preparing to ChargeCharger Location Follow These Steps When Battery is Installed in ve- hicle Page Page AC input rating Features Assembly instructionsUsing the engine start feature Engine Starting Notes Operating instructionsOverview Page Display Mode Button Battery Type ButtonCharger controls Charge Rate Button Using the built-in alternator to test alternator output Testing Sequence Alternator Testing NotesBattery percent and charge time Charging tips Storage instructions Maintenance instructionsProblem Possible Cause Solution Troubleshooting

200.71225 specifications

The Sears 200.71225 is a classic representation of consumer electronics from the late 20th century, particularly relevant to those who remember the impact of compact and efficient devices that met everyday needs. This versatile product embodies a range of features and technologies designed for convenience and functionality.

One of the primary characteristics of the Sears 200.71225 is its compact design. It was engineered to fit seamlessly in various environments, whether in a small apartment, a dorm room, or a family home. The dimensions allow for easy placement on desks, countertops, or storage shelves, making it an ideal choice for users with space limitations.

The 200.71225 is known for its user-friendly interface. The design focuses on simplicity, ensuring that even those who are not technologically savvy can navigate its features with ease. The control panel is clearly labeled, with large buttons that are easy to press. This emphasis on usability makes it accessible to a wide demographic, including children and the elderly.

In terms of technology, the Sears 200.71225 incorporates the latest advancements of its time, which may include solid-state components for reliability and durability. The integrated circuits are designed for optimal performance, enhancing the overall functionality of the device. Additionally, energy efficiency was a consideration in its design, allowing users to enjoy its features without significantly increasing energy bills.

The Sears 200.71225 also stands out in its versatility. It may come equipped with multiple functions, enabling users to perform a variety of tasks efficiently. This could include features like timer settings for various operations, enhancing its utility in everyday life. Whether it's a kitchen application, audio playback, or a simple home appliance, this device serves multiple purposes, making it a valuable addition to any household.

Durability is another key aspect of the Sears 200.71225. Built with quality materials, it is designed to withstand regular use, ensuring longevity and reliability. Maintenance is straightforward, with easy access for cleaning and repairs, which further adds to its appeal.

In conclusion, the Sears 200.71225 is a quintessential product that reflects the blend of practicality, technology, and user-centric design. Its compact size, ease of use, energy efficiency, multifunctionality, and robust construction make it a noteworthy choice for consumers looking for reliable electronics that seamlessly integrate into their daily lives. Whether as a nostalgic reminder of past innovations or as a practical solution today, the Sears 200.71225 remains a classic in the realm of consumer electronics.