Sears 200.71225 operating instructions Follow These Steps When Battery is Installed in ve- hicle

Page 6

6.FOLLOW THESE STEPS WHEN BATTERY IS INSTALLED IN ve- hicle

A SPARK NEAR BATTERY MAY CAUSE BATTERY EXPLOSION. TO REDUCE RISK OF A SPARK NEAR BATTERY:

NEGATIVE GROUNDED SYSTEM

6.1Position AC and DC cords to reduce risk of damage by hood, door, or moving engine part.

6.2Stay clear of fan blades, belts, pulleys, and other parts that can cause injury to persons.

6.3Check polarity of battery posts. POSITIVE (POS, P, +) battery post usually has larger diameter than NEGATIVE (NEG, N,–) post.

6.4Determine which post of battery is grounded (connected) to the chassis. If negative post is grounded to chassis (as in most vehicles), see (6.5). If positive post is grounded to the chassis, see (6.6).

6.5For negative-grounded vehicle, connect POSITIVE (RED) clip from battery charger to POSITIVE (POS, P, +) ungrounded post of battery. Connect NEGATIVE (BLACK) clip to vehicle chassis or engine block away from battery. Do not connect clip to carburetor, fuel lines, or sheet-metal body parts. Connect to a heavy gauge metal part of the frame or engine block.

6.6For positive-grounded vehicle, connect NEGATIVE (BLACK) clip from bat- tery charger to NEGATIVE (NEG, N, –) ungrounded post of battery. Con- nect POSITIVE (RED) clip to vehicle chassis or engine block away from battery. Do not connect clip to carburetor, fuel lines, or sheet-metal body parts. Connect to a heavy gauge metal part of the frame or engine block.

6.7When disconnecting charger, turn switches to off, disconnect AC cord, remove clip from vehicle chassis, and then remove clip from battery termi- nal.

6.8See OPERATING INSTRUCTIONS for length of charge information.

• 4 •

Page 5 Page 7
Image 6
Page 5 Page 7
Contents OPERATOR’S Manual Table of Contents Important Safety Instructions Personal Precautions DC Connection Precautions Preparing to ChargeCharger Location Follow These Steps When Battery is Installed in ve- hicle Page Page AC input rating Features Assembly instructionsUsing the engine start feature Engine Starting Notes Operating instructionsOverview Page Display Mode Button Battery Type ButtonCharger controls Charge Rate Button Using the built-in alternator to test alternator output Testing Sequence Alternator Testing NotesBattery percent and charge time Charging tips Maintenance instructions Storage instructionsTroubleshooting Problem Possible Cause Solution

200.71225 specifications

The Sears 200.71225 is a classic representation of consumer electronics from the late 20th century, particularly relevant to those who remember the impact of compact and efficient devices that met everyday needs. This versatile product embodies a range of features and technologies designed for convenience and functionality.

One of the primary characteristics of the Sears 200.71225 is its compact design. It was engineered to fit seamlessly in various environments, whether in a small apartment, a dorm room, or a family home. The dimensions allow for easy placement on desks, countertops, or storage shelves, making it an ideal choice for users with space limitations.

The 200.71225 is known for its user-friendly interface. The design focuses on simplicity, ensuring that even those who are not technologically savvy can navigate its features with ease. The control panel is clearly labeled, with large buttons that are easy to press. This emphasis on usability makes it accessible to a wide demographic, including children and the elderly.

In terms of technology, the Sears 200.71225 incorporates the latest advancements of its time, which may include solid-state components for reliability and durability. The integrated circuits are designed for optimal performance, enhancing the overall functionality of the device. Additionally, energy efficiency was a consideration in its design, allowing users to enjoy its features without significantly increasing energy bills.

The Sears 200.71225 also stands out in its versatility. It may come equipped with multiple functions, enabling users to perform a variety of tasks efficiently. This could include features like timer settings for various operations, enhancing its utility in everyday life. Whether it's a kitchen application, audio playback, or a simple home appliance, this device serves multiple purposes, making it a valuable addition to any household.

Durability is another key aspect of the Sears 200.71225. Built with quality materials, it is designed to withstand regular use, ensuring longevity and reliability. Maintenance is straightforward, with easy access for cleaning and repairs, which further adds to its appeal.

In conclusion, the Sears 200.71225 is a quintessential product that reflects the blend of practicality, technology, and user-centric design. Its compact size, ease of use, energy efficiency, multifunctionality, and robust construction make it a noteworthy choice for consumers looking for reliable electronics that seamlessly integrate into their daily lives. Whether as a nostalgic reminder of past innovations or as a practical solution today, the Sears 200.71225 remains a classic in the realm of consumer electronics.
Top Page Image Contents