Sears 200.71225 Testing Sequence, Alternator Testing Notes, Battery percent and charge time

Page 16

15.1TESTING SEQUENCE

There are three basic steps required to use the 71225 as an alternator tester.

•Connect the charger battery clamps to the battery or charging system.

•Connect the charger power cord to a 120V AC wall outlet.

•Start the vehicle and turn on the vehicle’s headlights. Read the voltage on the digital display or press the display mode button to set the tester to Alternator % to read the voltage as a percent of charge.

15.2ALTERNATOR TESTING NOTES

•The display mode cannot be set to Alternator % during charging.

16.battery percent and charge time

This charger adjusts the charging time in order to charge the battery com- pletely, efficiently and safely. The microprocessor automatically makes the necessary decisions. However, this section includes guidelines that can be used to estimate charging times.

The duration of the charging process depends on three factors:

16.1Battery State – If a battery has only been slightly discharged, it can be charged in less than a few hours. The same battery could take up to 10 hours if very weak. The battery state can be estimated by using the built-in tester. The lower the reading, the longer charging will take.

16.2Battery Rating – A higher rated battery will take longer to charge than a lower rated battery under the same conditions. A battery is rated in ampere-hours (AH), reserve capacity (RC) and cold cranking amps (CCA). The lower the rating, the quicker the battery will charge.

16.3Charge Rate – The charge rate is measured in amps. This charger pro- vides charge rates of 2A, 12A and 30A. The 80A rate is for engine start only. The 2A rate is for charging smaller batteries such as those used for motorcycles and garden tractors. Such batteries should not be charged using the 12A or 30A rate. The 12A and 30A rates are for charging larger batteries. In the 30A mode, the charger begins at a low charge rate and increases the charge rate if it is determined that the battery can accept the higher rate. All charging modes will decrease the charge rate as the bat- tery approaches maximum charge. After the charging process has started, the digital display can be used to determine charging progress by select- ing the BATTERY % mode.

• 14 •

Page 15 Page 17
Image 16
Page 15 Page 17
Contents OPERATOR’S Manual Table of Contents Important Safety Instructions Personal Precautions Preparing to Charge DC Connection PrecautionsCharger Location Follow These Steps When Battery is Installed in ve- hicle Page Page AC input rating Assembly instructions FeaturesUsing the engine start feature Operating instructions Engine Starting NotesOverview Page Battery Type Button Display Mode ButtonCharger controls Charge Rate Button Using the built-in alternator to test alternator output Alternator Testing Notes Testing SequenceBattery percent and charge time Charging tips Maintenance instructions Storage instructionsTroubleshooting Problem Possible Cause Solution

200.71225 specifications

The Sears 200.71225 is a classic representation of consumer electronics from the late 20th century, particularly relevant to those who remember the impact of compact and efficient devices that met everyday needs. This versatile product embodies a range of features and technologies designed for convenience and functionality.

One of the primary characteristics of the Sears 200.71225 is its compact design. It was engineered to fit seamlessly in various environments, whether in a small apartment, a dorm room, or a family home. The dimensions allow for easy placement on desks, countertops, or storage shelves, making it an ideal choice for users with space limitations.

The 200.71225 is known for its user-friendly interface. The design focuses on simplicity, ensuring that even those who are not technologically savvy can navigate its features with ease. The control panel is clearly labeled, with large buttons that are easy to press. This emphasis on usability makes it accessible to a wide demographic, including children and the elderly.

In terms of technology, the Sears 200.71225 incorporates the latest advancements of its time, which may include solid-state components for reliability and durability. The integrated circuits are designed for optimal performance, enhancing the overall functionality of the device. Additionally, energy efficiency was a consideration in its design, allowing users to enjoy its features without significantly increasing energy bills.

The Sears 200.71225 also stands out in its versatility. It may come equipped with multiple functions, enabling users to perform a variety of tasks efficiently. This could include features like timer settings for various operations, enhancing its utility in everyday life. Whether it's a kitchen application, audio playback, or a simple home appliance, this device serves multiple purposes, making it a valuable addition to any household.

Durability is another key aspect of the Sears 200.71225. Built with quality materials, it is designed to withstand regular use, ensuring longevity and reliability. Maintenance is straightforward, with easy access for cleaning and repairs, which further adds to its appeal.

In conclusion, the Sears 200.71225 is a quintessential product that reflects the blend of practicality, technology, and user-centric design. Its compact size, ease of use, energy efficiency, multifunctionality, and robust construction make it a noteworthy choice for consumers looking for reliable electronics that seamlessly integrate into their daily lives. Whether as a nostalgic reminder of past innovations or as a practical solution today, the Sears 200.71225 remains a classic in the realm of consumer electronics.
Top Page Image Contents