Sears 200.71225 Preparing to Charge, Charger Location, DC Connection Precautions

Page 5

3.PREPARING TO CHARGE

3.1If necessary to remove battery from vehicle to charge, always remove grounded terminal from battery first. Make sure all accessories in the vehicle are off, so as not to cause an arc.

3.2Be sure area around battery is well ventilated while battery is being charged.

3.3Clean battery terminals. Be careful to keep corrosion from coming in con- tact with eyes.

3.4Add distilled water in each cell until battery acid reaches level specified by battery manufacturer. Do not overfill. For a battery without removable cell caps, such as valve regulated lead acid batteries, carefully follow manu- facturer’s recharging instructions.

3.5Study all battery manufacturer’s specific precautions while charging and recommended rates of charge.

3.6Determine voltage of battery by referring to vehicle owner’s manual and make sure that output voltage selector switch is set at correct voltage. If charger has adjustable charge rate, charge battery initially at lowest rate.

4.CHARGER LOCATION

4.1Locate charger as far away from battery as DC cables permit.

4.2Never place charger directly above battery being charged; gases from bat- tery will corrode and damage charger.

4.3Never allow battery acid to drip on charger when reading electrolyte spe- cific gravity or filling battery.

4.4Do not operate charger in a closed-in area or restrict ventilation in any way.

4.5Do not set a battery on top of charger.

5.DC CONNECTION PRECAUTIONS

5.1Connect and disconnect DC output clips only after setting any charger switches to “off” position and removing AC cord from electric outlet. Never allow clips to touch each other.

5.2Attach clips to battery and chassis, as indicated in 6.5, 6.6, and 7.2 through 7.4.

• 3 •

Page 4 Page 6
Image 5
Page 4 Page 6
Contents OPERATOR’S Manual Table of Contents Important Safety Instructions Personal Precautions Charger Location DC Connection PrecautionsPreparing to Charge Follow These Steps When Battery is Installed in ve- hicle Page Page AC input rating Using the engine start feature FeaturesAssembly instructions Overview Engine Starting NotesOperating instructions Page Charger controls Display Mode ButtonBattery Type Button Charge Rate Button Using the built-in alternator to test alternator output Battery percent and charge time Testing SequenceAlternator Testing Notes Charging tips Storage instructions Maintenance instructionsProblem Possible Cause Solution Troubleshooting

200.71225 specifications

The Sears 200.71225 is a classic representation of consumer electronics from the late 20th century, particularly relevant to those who remember the impact of compact and efficient devices that met everyday needs. This versatile product embodies a range of features and technologies designed for convenience and functionality.

One of the primary characteristics of the Sears 200.71225 is its compact design. It was engineered to fit seamlessly in various environments, whether in a small apartment, a dorm room, or a family home. The dimensions allow for easy placement on desks, countertops, or storage shelves, making it an ideal choice for users with space limitations.

The 200.71225 is known for its user-friendly interface. The design focuses on simplicity, ensuring that even those who are not technologically savvy can navigate its features with ease. The control panel is clearly labeled, with large buttons that are easy to press. This emphasis on usability makes it accessible to a wide demographic, including children and the elderly.

In terms of technology, the Sears 200.71225 incorporates the latest advancements of its time, which may include solid-state components for reliability and durability. The integrated circuits are designed for optimal performance, enhancing the overall functionality of the device. Additionally, energy efficiency was a consideration in its design, allowing users to enjoy its features without significantly increasing energy bills.

The Sears 200.71225 also stands out in its versatility. It may come equipped with multiple functions, enabling users to perform a variety of tasks efficiently. This could include features like timer settings for various operations, enhancing its utility in everyday life. Whether it's a kitchen application, audio playback, or a simple home appliance, this device serves multiple purposes, making it a valuable addition to any household.

Durability is another key aspect of the Sears 200.71225. Built with quality materials, it is designed to withstand regular use, ensuring longevity and reliability. Maintenance is straightforward, with easy access for cleaning and repairs, which further adds to its appeal.

In conclusion, the Sears 200.71225 is a quintessential product that reflects the blend of practicality, technology, and user-centric design. Its compact size, ease of use, energy efficiency, multifunctionality, and robust construction make it a noteworthy choice for consumers looking for reliable electronics that seamlessly integrate into their daily lives. Whether as a nostalgic reminder of past innovations or as a practical solution today, the Sears 200.71225 remains a classic in the realm of consumer electronics.
Top Page Image Contents