Emerson 2330MKII manual Operating Voltages and Signals, Controller Weights, Operating Conditions

Page 40

BOOK 0958-B

TABLE 9. OPERATING VOLTAGES AND SIGNALS

	POWER SOURCE	OUTPUT VDC		SPEED	MAGNETIC
	POWER SOURCE			REFERENCE	CONTROL
	(Single-phase)			REFERENCE	CONTROL
	(Single-phase)	Armature	Field	SIGNAL	VOLTAGE
		Armature	Field	SIGNAL	VOLTAGE

	115V, 50 or 60 Hz	0 - 90	50/100	0 -5 Vdc
				0 - 10 Vdc	24 VDC
	230V, 50 or 60 Hz	0 - 180	100/200	0 - 10 Vdc	24 VDC
	230V, 50 or 60 Hz	0 - 180	100/200	4 - 20Ma

TABLE 10. CONTROLLER WEIGHTS

CONTROLLER MODEL	WEIGHT - LBS (KG)

Rated Horsepower (HP)	1/6 - 2		3

2331, 2332, 2336	3.25 (1.48)
2331A, 2332A, 2336A	3.80 (1.75)
2331P0, 2331P1, 2331P2	5.50 (2.50)		NA

2331AP0, 2331AP3	6.05 (2.75)		NA

2335	0.90 (0.42)

2335A,	1.70 (0.77)

OPERATING CONDITIONS
1.	Altitude, Standard	1000 Meters (3300 Feet) Maximum1
2.	Ambient Temperature	0 - 40°C (32°F - 104°F)2
3.	Line Frequency Variation	± 2 Hz Of Rated
4.	Line Voltage Variation	±10% Of Rated
5.	Relative Humidity	95% Noncondensing
PERFORMANCE CHARACTERISTICS
1.	Controlled Speed Range	0 To Motor Base Speed
2.	Displacement Power Factor (Rated Speed/Rated Load)	87%

3.Efficiency (Rated Speed/Rated Load)

	a. Controller Only	98%
	b. Controller With Motor, Typical	85%
4.	Speed Regulation	See Table 11

1.Controller can be derated by 1% per 100 meters to operate at higher altitudes.

2.55°C (131°F) maximum in enclosed areas where open-chassis controllers are mounted.

32

Image 40

Contents Book 0958-B Page 3 HP Book 0958-B Table of Contents List of Tables List of IllustrationsBlank Following must be strictly adhered to at all times General Description Section General Information IntroductionModel Types Motor Selection Section Installation Installation GuidelinesDo not use solid wire Installing the Controller Jumper J4 Position Motor Armature Current Rating AmperesInstall the controller cover, if used Controller Mounting Configurations Controller Mounting Dimensions Logic connection diagram, Run-Stop-Jog Switch Book 0958-B Book 0958-B Book 0958-B Signal Connection Diagram, Motor Speed Potentiometer Signal Connection Diagram, Tachometer Feedback Signal Connection Diagram, 4-20mA Interface Page Initial Potentiometer Settings Description Initial StartupBook 0958-B RUN Section Operation Power ON/OFFStop Torque Control Speed ControlJOG Reverse Load MonitorCurrent Loop Transducers Inoperative MotorBlank Section Maintenance and Repair General Adjustment Instructions AccelerationDeceleration IR CompensationMinimum Speed Tachometer Feedback SetupCurrent Limit Troubleshooting Indication Possible Cause Corrective ActionOne or more SCR‘s or Diode D1b Troubleshooting Indication Possible Cause Corrective ActionTroubleshooting Indication Parts LIST, Series 2330 Mkii Controllers Fincor Part Section Parts ListPart Blank Section Ratings and Specifications 120%Operating Voltages and Signals Controller WeightsPerformance Characteristics Operating ConditionsSpecifications AdjustmentsShunt Field Data Tachometer Feedback Voltage Selection Section Drawings Functional Schematic, Series 2330MKII Series 2330MKII Control Board, 1/6 3HP Blank Index Maximum Speed Book 0958-B