AEG PV 2000 operating instructions Mounting Protect PV to the wall

12

mounting Protect PV to the wall

1.Select a wall or solid vertical surface that can support the PV-Inverter.

2.Protect PV requires adequate cooling space. Allow at least 20cm space above and below the inverter.

20 cm space

20 cm space

3.Using the mounting frame as a template, drill 4 holes as illustrated in the following figures.

4.Fix the mounting frame as the figure shows. Do not drive-in the screws flush to the wall. Instead, leave 2 to 4mm exposed.

5.Hang the inverter on the mounting frame.